Bilder sind nur zur Referenz
24LC256-I/ST
IC EEPROM 256KBIT I2C 8TSSOP
- Hersteller
- Fr. Teil #24LC256-I/ST
- Paket TSSOP-8
- Datenblatt 24LC256-I/ST DataSheet
- Auf Lager3702
100% Original und Neu
24 Stunden bereit zum Versand
365 Tage Garantie
RFQ & Erhalten Sie mehr Rabatte
Spezifikationen
| Package | Tube |
| ProductStatus | Active |
| MemoryType | Non-Volatile |
| MemoryFormat | EEPROM |
| Technology | EEPROM |
| MemorySize | 256Kb (32K x 8) |
| MemoryInterface | I²C |
| ClockFrequency | 400 kHz |
| WriteCycleTime-WordPage | 5ms |
| AccessTime | 900 ns |
| Voltage-Supply | 2.5V ~ 5.5V |
| OperatingTemperature | -40°C ~ 85°C (TA) |
| MountingType | Surface Mount |
| Package/Case | 8-TSSOP (0.173, 4.40mm Width) |
Übersicht
Description
This EEPROM communicates via I2C (Inter-Integrated Circuit) protocol, allowing multiple devices to be connected on the same bus, with a maximum clock frequency of 1 MHz. The 24LC256-I/ST operates within a voltage range of 1.8V to 5.5V, making it versatile for different power supply environments.
Key features include a built-in page write capability, which allows for efficient writing of up to 16 bytes at once, and a write cycle time of approximately 5 ms. This chip is commonly used in applications like data logging, configuration settings, and firmware storage in consumer electronics, industrial controls, and automotive systems due to its durability and reliability.
Features
- I2C Interface: Supports fast mode up to 400 kHz, allowing for easy integration with microcontrollers.
- 8-Pin Package: Available in various packages, including SOIC and TSSOP, facilitating compact designs.
- Wide Voltage Range: Operates from 1.7V to 5.5V, making it suitable for battery-powered devices.
- Write Protection: Features a hardware write protection pin to prevent accidental writes.
- Byte and Page Write: Allows for both byte-wise and page-wise writing (up to 16 bytes at once).
- Data Retention: Ensures data retention of up to 100 years at room temperature.
- Endurance: Supports up to 1 million write cycles per memory cell.
- Low Power Consumption: Consumes minimal power during operation, with a typical standby current of 1 µA.
These attributes make the 24LC256-I/ST ideal for applications in consumer electronics, automotive, and industrial sectors requiring non-volatile memory.
Package
Pinout
1. VCC - Power supply (typically 2.5V to 5.5V).
2. GND - Ground reference.
3. SDA - Serial Data Line for data input/output.
4. SCL - Serial Clock Line for timing control of the I2C interface.
5. WP - Write Protect; when connected to VCC, it disables write operations.
6. A0 - Device address selection pin (can be tied to GND or VCC to set the I2C address).
7. A1 - Another device address selection pin.
8. A2 - A third device address selection pin.
The 24LC256-I/ST has a memory capacity of 256 Kbit (32 Kbytes) and supports multiple devices on the same I2C bus by using the A0, A1, and A2 pins for address selection.
Manufacturer
Application
Equivalent
1. AT24C256 (Microchip)
2. M24C256 (STMicroelectronics)
3. CAT24C256 (ON Semiconductor)
4. S-24C256 (Seiko Instruments)
These chips share similar specifications, such as memory size, I2C interface, and voltage range. Always check datasheets for specific features and compatibility.
Versand
VersandmethodenWir
bieten Sie globale Versanddienstleistungen durch DHL, FedEx, TNT, UPS oder einen anderen Spediteur Ihrer Wahl.
Versandgebührenreferenz (DHL/FedEx):
DHL: Versandkosten reichen von $25-$45 (0.5kg), mit einer geschätzten Lieferzeit von 2-5 Werktagen.
von FedEx: Versandkosten reichen von $25-$40 (0.5kg), mit einer geschätzten Lieferzeit von 3-7 Werktagen.
UPS: Versandkosten reichen von $25-$45 (0.5kg), mit einer geschätzten Lieferzeit von 3-7 Werktagen.
TNT: Versandkosten reichen von $25-$65 (0.5kg), mit einer geschätzten Lieferzeit von 3-7 Werktagen.
EMS: Versandkosten reichen von $30-$50 (0.5kg), mit einer geschätzten Lieferzeit von 7-15 Werktagen.
Registrierte Luftpost: Versandkosten sind $ 2- $ 4 (0,1 kg), mit einer geschätzten Lieferzeit von 5-20 Werktagen.
Zahlungen
Payment Methods
Die Zahlungsfrist ist 100% Prepaid.
Derzeit akzeptieren wir nur die folgenden Zahlungsmethoden:
1. PayPal
2. Kredit- / Debitkarte
3. Überweisung
Ähnliche
-
MX25R8035FM1IL0
Macronix
-
MX25V1635FZNI
Macronix
-
MX66U1G45GXDI00
Macronix
-
MX25V4035FZUI
Macronix
-
MX25R3235FZNIL0
Macronix
-
MX29GL512FHXFI-11..
Macronix
-
MX25U3232FZBI02
Macronix
-
MX25L6433FM2I-08G
Macronix
-
MX25L12833FM2I-10..
Macronix
-
MX25L12835FZ2I-10..
Macronix
-
MX25L25645GXDI-08..
Macronix
-
MX29F040CTI-70G
Macronix