AT17LV512-10JU

Bilder sind nur zur Referenz

AT17LV512-10JU

IC SRL CONFG EEPROM 512K 20-PLCC

100% Original und Neu

24 Stunden bereit zum Versand

365 Tage Garantie

RFQ & Erhalten Sie mehr Rabatte

Spezifikationen

Supplier Microchip Technology
Package Tube
ProductStatus Active
ProgrammableType Serial EEPROM
MemorySize 512kb
Voltage-Supply 3V ~ 3.6V, 4.5V ~ 5.5V
OperatingTemperature -40°C ~ 85°C
MountingType Surface Mount
Package/Case 20-LCC (J-Lead)

Übersicht

Description

AT17LV512-10JU is Atmel/Microchip’s low-voltage 512-kbit serial PROM (nonvolatile memory), typically used as a configuration or boot memory.
Key points:
- Capacity/organization: 512 Kbits, arranged as 64K × 8.
- Interface: Microwire/SPI-like serial interface with CS, CLK, DI, DO.
- Voltage: 2.7–3.6 V (low-voltage operation).
- Speed grade: -10 indicates up to 10 MHz serial clock.
- Package: 8-pin small-outline (SOP) package (package code JU).
- Use: Storing configuration data for FPGAs/PLDs, microcontrollers, boot data, etc.
- Nature: Nonvolatile memory; data retained without power; generally not intended for frequent in-system rewriting (PROM with fixed data).
For exact opcodes, timing, addressing, and write/erase behavior, refer to the datasheet.

Features

Key features of AT17LV512-10JU:
- 512 Kbit serial EEPROM (64K × 8)
- I2C two‑wire interface: standard/fast mode (100/400 kHz)
- Low‑voltage operation: VCC 1.65–3.6 V
- 3 address pins (A0–A2) + WP (write‑protect) pin
- Page write capability (32-byte pages) with automatic write cycle
- Supports random and sequential reads
- Endurance: up to about 1,000,000 write cycles; data retention ~40 years
- Low power with low active/standby currents
- Operating temperature: typically −40°C to +85°C (industrial)
- Package: 8‑pin (JU) package (e.g., SOIC/DIP variants)
Suitable for storage of small data blocks, configuration data, and device IDs in low‑voltage embedded systems.

Package

28-pin SOIC (small-outline) package.

Pinout

- Pin count: 8 pins (DIP-8/SOIC-8)
- Function: 512-kbit low-voltage SPI Serial EEPROM memory. Non-volatile data storage with SPI interface (CS, SCK, SI, SO) plus WP, HOLD, VCC, and GND.

Manufacturer

- Manufacturer: Atmel Corporation (now part of Microchip Technology after a 2016 acquisition).
- What kind of company: An American semiconductor company that designs and manufactures memory and microcontroller ICs for embedded systems (an IDM with its own fabrication).

Application

- External configuration memory for FPGAs/CPLDs (bitstreams)
- Boot/firmware memory for microcontrollers and embedded processors
- Low-voltage non-volatile storage for system parameters, calibration data, and LUTs
- Field-upgradable memory in consumer and industrial electronics
- General SPI-compatible/low-voltage non-volatile storage where compact, reliable config data is needed

Equivalent

AT17LV512-10JU is a 512 kbit, low-voltage serial configuration EEPROM (SPI/Microwire). Equivalents from other vendors include:
- Microchip: 25AA512 and 25LC512
- Macronix: MX25L512
- SST: SST25VF512
Check compatibility (voltage 2.7–3.6 V, SPI/microwire interface, speed) and packaging (-JU denotes 8‑pin SOIC).

Versand

VersandmethodenWir

bieten Sie globale Versanddienstleistungen durch DHL, FedEx, TNT, UPS oder einen anderen Spediteur Ihrer Wahl.


Versandgebührenreferenz (DHL/FedEx):

DHL: Versandkosten reichen von $25-$45 (0.5kg), mit einer geschätzten Lieferzeit von 2-5 Werktagen.

von FedEx: Versandkosten reichen von $25-$40 (0.5kg), mit einer geschätzten Lieferzeit von 3-7 Werktagen.

UPS: Versandkosten reichen von $25-$45 (0.5kg), mit einer geschätzten Lieferzeit von 3-7 Werktagen.

TNT: Versandkosten reichen von $25-$65 (0.5kg), mit einer geschätzten Lieferzeit von 3-7 Werktagen.

EMS: Versandkosten reichen von $30-$50 (0.5kg), mit einer geschätzten Lieferzeit von 7-15 Werktagen.

Registrierte Luftpost: Versandkosten sind $ 2- $ 4 (0,1 kg), mit einer geschätzten Lieferzeit von 5-20 Werktagen.

Zahlungen

Payment Methods

Die Zahlungsfrist ist 100% Prepaid.

Derzeit akzeptieren wir nur die folgenden Zahlungsmethoden:

1. PayPal

2. Kredit- / Debitkarte

3. Überweisung