BQ29700DSET

Bilder sind nur zur Referenz

BQ29700DSET

IC BATT PROT LI-ION 1CELL 6WSON

  • Hersteller
  • Fr. Teil #BQ29700DSET
  • Paket WSON-6
  • Datenblatt
  • Auf Lager2832

100% Original und Neu

24 Stunden bereit zum Versand

365 Tage Garantie

RFQ & Erhalten Sie mehr Rabatte

Spezifikationen

Package Tape & Reel (TR),Cut Tape (CT)
ProductStatus Active
Function Battery Protection
BatteryChemistry Lithium Ion/Polymer
NumberofCells 1
FaultProtection Over Current, Over/Under Voltage, Short Circuit
OperatingTemperature -40°C ~ 85°C (TA)
MountingType Surface Mount
Package/Case 6-WFDFN

Übersicht

Description

BQ29700DSET is TI’s protection IC for a single-cell Li‑ion/Li‑polymer pack. It monitors cell voltage, current, and temperature and drives two back-to-back external MOSFETs to protect the cell from faults. If an overcharge, overdischarge, or overcurrent/short is detected, it disconnects the pack and then auto-retries after the fault clears (hiccup mode).
The DSET version adds a DSET pin to program the discharge current limit with an external resistor, allowing you to tailor protection to the specific pack.
Typical applications: 1‑cell battery packs in portable electronics, power tools, and accessories needing safe Li‑ion protection.
Key features: over/under-voltage protection, overcurrent/short‑circuit protection, back-to-back MOSFET control, auto-retry, low quiescent current, and a small package (SOT‑23/6). Often used with an external NTC for temperature sensing and the recommended MOSFET arrangement as per the datasheet.

Features

Key features of the bq29700DSET (1S Li‑ion/Li‑polymer battery protector):
- Protects a single cell with two back‑to‑back external MOSFETs to fully isolate the pack during faults (charge and discharge paths).
- Protection functions: overcharge (OCD), overdischarge (ODP), overcurrent/short‑circuit (OCP/SCP), and overtemperature.
- Uses RSENSE for current measurement and supports a thermistor input for temperature monitoring.
- Independent control of charge and discharge directions with fast OCP/SCP protection and latch behavior.
- Auto‑retry after a fault and fault/Status signaling for host monitoring.
- Low quiescent current for long‑life standby in battery packs.
- Designed for convenient 1S protection with minimal external components.
- Suitable voltage range for a typical 1S Li‑ion cell (roughly in the 2.7–4.3 V region, depending on the exact cell chemistry and setup).
Note: exact voltage thresholds, timing, and pinout should be confirmed in the datasheet for your package variant.

Package

An 8-pin surface-mount package: SOIC (D-package).

Pinout

- Pin count: 8 pins (8-pin package such as SOP-8/UW).
- Function: A Li-Ion/Li-polymer battery protection IC. It monitors cell voltage and current and controls two external MOSFETs to protect against overcharge, overdischarge, overcurrent, and short-circuit conditions. The DSET variant uses the DSET pin to program the discharge current limit via an external resistor.

Manufacturer

- Manufacturer: Texas Instruments (TI).
- What kind of company: An American multinational semiconductor company that designs and manufactures analog and embedded processing integrated circuits (ICs) and related semiconductor products.

Application

Single-cell Li‑ion/Li‑polymer battery protection IC.
Used in protected packs for portable consumer electronics (cell phones, cameras, MP3 players, PDAs, handheld gaming).
Also suitable for USB power banks and compact medical/portable devices.
Provides overcharge, overdischarge, and overcurrent/short‑circuit protection with integrated FETs and status outputs for safe operation.

Equivalent

There’s no published exact cross-reference for BQ29700DSET. It’s TI’s standalone Li-ion protection IC requiring external FETs. Closest TI options are other members of the BQ2970x/BQ29700 family. For third‑party equivalents, consider Seiko Instruments S‑825x/S‑826x series or On Semiconductor NCP safety‑protector ICs, and other 1–2 cell protector devices. Use TI’s Cross Reference tool or distributor databases to locate current equivalents.

Versand

VersandmethodenWir

bieten Sie globale Versanddienstleistungen durch DHL, FedEx, TNT, UPS oder einen anderen Spediteur Ihrer Wahl.


Versandgebührenreferenz (DHL/FedEx):

DHL: Versandkosten reichen von $25-$45 (0.5kg), mit einer geschätzten Lieferzeit von 2-5 Werktagen.

von FedEx: Versandkosten reichen von $25-$40 (0.5kg), mit einer geschätzten Lieferzeit von 3-7 Werktagen.

UPS: Versandkosten reichen von $25-$45 (0.5kg), mit einer geschätzten Lieferzeit von 3-7 Werktagen.

TNT: Versandkosten reichen von $25-$65 (0.5kg), mit einer geschätzten Lieferzeit von 3-7 Werktagen.

EMS: Versandkosten reichen von $30-$50 (0.5kg), mit einer geschätzten Lieferzeit von 7-15 Werktagen.

Registrierte Luftpost: Versandkosten sind $ 2- $ 4 (0,1 kg), mit einer geschätzten Lieferzeit von 5-20 Werktagen.

Zahlungen

Payment Methods

Die Zahlungsfrist ist 100% Prepaid.

Derzeit akzeptieren wir nur die folgenden Zahlungsmethoden:

1. PayPal

2. Kredit- / Debitkarte

3. Überweisung

Ähnliche