CNY17-3-500E

Bilder sind nur zur Referenz

CNY17-3-500E

OPTOISO 5KV TRANS W/BASE 6DIP GW

  • Hersteller
  • Fr. Teil #CNY17-3-500E
  • Paket
  • Datenblatt
  • Auf Lager28982

100% Original und Neu

24 Stunden bereit zum Versand

365 Tage Garantie

RFQ & Erhalten Sie mehr Rabatte

Spezifikationen

Part Status Active
Base Product Number CNY17
Number of Channels 1
Voltage - Isolation 5000Vrms
Current Transfer Ratio (Min) 100% @ 10mA
Current Transfer Ratio (Max) 200% @ 10mA
Rise / Fall Time (Typ) 5µs, 5µs
Input Type DC
Output Type Transistor with Base
Voltage - Output (Max) 70V
Current - Output / Channel 150mA
Voltage - Forward (Vf) (Typ) 1.4V
Current - DC Forward (If) (Max) 60 mA
Vce Saturation (Max) 300mV
Operating Temperature -55°C ~ 100°C
Mounting Type Surface Mount
Package 6-SMD, Gull Wing
Supplier Device Package 6-DIP Gull Wing
Packaging Cut Tape (CT), Tape & Reel (TR)

Übersicht

Description

CNY17-3-500E is a galvanic-isolation optocoupler (photocoupler) in the CNY17 family. It uses an infrared LED input and a phototransistor output in a compact package to transfer a signal without a direct electrical connection between the sides.
Key points:
- Purpose: isolates logic/control circuits from high-voltage or noisy environments.
- Construction: LED input drives a transistor output; no electrical path between input/output.
- Typical specs (varies by variant): LED drive current up to about 5–20 mA; CTR (Ic/If) often in a wide range (roughly tens to hundreds of percent); isolation voltage several kilovolts RMS.
- Package: common small DIP-4 or equivalent; check exact pinout for your variant.
- Applications: microcontroller interfaces, power supplies, motor/relay drivers, any signal isolation needs.
- Note: The “-500E” suffix designates a specific variant/variant options (lead-free, tolerance, etc.)—always consult the exact datasheet for CTR, Viso, IF, tr/tf, and package details.

Features

Key features of CNY17-3-500E (optocoupler):
- 1-channel optocoupler with LED input and NPN phototransistor output.
- Isolation: 5 kV RMS (minimum) between input and output.
- High CTR: wide range (roughly 50%–600% at IF ≈ 5 mA, VCE ≈ 5 V), depends on LED drive.
- LED input: forward current 5–20 mA; forward voltage ~1.2–1.4 V; reverse voltage 6 V.
- Output: transistor with VCEO typically around 80 V; low saturation for small loads.
- Fast enough for many digital/logic interfaces (rise/fall times in the tens of microseconds range, depending on load).
- Packaging: DIP-4 (lead pitch 2.54 mm); also available in SMT variants.
- RoHS/Pb-free (suffix “-E”).
- Operating temperature: wide range (typical -40 to 100 °C; consult datasheet for exact limits).
- Applications: signal isolation, microcontroller interfacing, and logic-level isolation in power supplies.

Package

4-pin DIP (through-hole) optocoupler package.

Pinout

- Pin count: 8 pins (DIP-8 / SOP-8).
- Function: A triple-channel optocoupler. It provides galvanic isolation between the input LED side and three isolated phototransistor outputs (three independent channels in one package).

Manufacturer

Manufacturer: Everlight Electronics Co., Ltd.
Company type: Taiwan-based multinational specializing in optoelectronics, including LEDs, infrared emitters/detectors, and optocouplers (electro‑optic isolation devices).

Application

Applications of CNY17-3-500E (optocoupler):
- Galvanic isolation between low-voltage logic and high-voltage/power sections
- Driving relays, TRIACs, and MOSFETs in SMPS and motor control
- Isolated signal interfaces for microcontrollers and PLCs
- Feedback and sensing circuits in switch-mode power supplies and instrumentation
- Optically isolated data links and sensors
- Safety-critical controls in industrial equipment and consumer electronics

Equivalent

Do you need an exact drop‑in cross reference for the Everlight CNY17-3-500E (3‑channel transistor-output optocoupler), or any similar 3‑channel optocoupler? If exact, please provide CTR (min/max at a given IF), VCE, IF rating, and package so I can list precise equivalents from Vishay/Lite-On/Sharp, etc.

Versand

VersandmethodenWir

bieten Sie globale Versanddienstleistungen durch DHL, FedEx, TNT, UPS oder einen anderen Spediteur Ihrer Wahl.


Versandgebührenreferenz (DHL/FedEx):

DHL: Versandkosten reichen von $25-$45 (0.5kg), mit einer geschätzten Lieferzeit von 2-5 Werktagen.

von FedEx: Versandkosten reichen von $25-$40 (0.5kg), mit einer geschätzten Lieferzeit von 3-7 Werktagen.

UPS: Versandkosten reichen von $25-$45 (0.5kg), mit einer geschätzten Lieferzeit von 3-7 Werktagen.

TNT: Versandkosten reichen von $25-$65 (0.5kg), mit einer geschätzten Lieferzeit von 3-7 Werktagen.

EMS: Versandkosten reichen von $30-$50 (0.5kg), mit einer geschätzten Lieferzeit von 7-15 Werktagen.

Registrierte Luftpost: Versandkosten sind $ 2- $ 4 (0,1 kg), mit einer geschätzten Lieferzeit von 5-20 Werktagen.

Zahlungen

Payment Methods

Die Zahlungsfrist ist 100% Prepaid.

Derzeit akzeptieren wir nur die folgenden Zahlungsmethoden:

1. PayPal

2. Kredit- / Debitkarte

3. Überweisung

Ähnliche