DRV8833PWP

Bilder sind nur zur Referenz

DRV8833PWP

IC MOTOR DRIVER PAR 16HTSSOP

100% Original und Neu

24 Stunden bereit zum Versand

365 Tage Garantie

RFQ & Erhalten Sie mehr Rabatte

Spezifikationen

Package Tube
ProductStatus Active
MotorType-Stepper Bipolar
MotorType-ACDC Brushed DC
Function Driver - Fully Integrated, Control and Power Stage
OutputConfiguration Half Bridge (4)
Interface PWM
Technology NMOS
Applications DC Motors, General Purpose, Solenoids
Current-Output 1.5A
Voltage-Supply 2.7V ~ 10.8V
Voltage-Load 2.7V ~ 10.8V
OperatingTemperature -40°C ~ 150°C (TJ)
MountingType Surface Mount
Package/Case 16-PowerTSSOP (0.173, 4.40mm Width)

Übersicht

Description

DRV8833PWP is a Texas Instruments dual H-bridge motor driver. It contains two full-bridge outputs, so you can drive two DC motors or a bidirectional stepper from a microcontroller.
Key points:
- Supply and current: operates from about 2.7 V to 10.8 V; provides up to roughly 1 A per bridge (continuous/peak ratings depend on cooling and motor).
- Control: four logic inputs (IN1/IN2 for channel A, IN3/IN4 for channel B) for forward/reverse/brake; PWM can be used for speed control.
- Current regulation and protection: VREF sets current limit; protections include undervoltage lockout, overcurrent protection, and thermal shutdown.
- Features: supports different decay modes for smooth motor control; compact PWP package.
Applications:
- Small robotics, hobby projects, printers, and other devices needing compact dual H-bridge motor drive.
For exact pinout, current limit, decays, and thermal behavior, consult the DRV8833PWP datasheet.

Features

Concise features of DRV8833PWP:
- Dual H-bridge motor drivers for brushed DC motors or a bipolar stepper
- 2 A peak current per bridge (current regulation available)
- Wide operating voltage: approx. 2.7 V to 10.8 V
- Adjustable current limit via Vref and built‑in current regulation/chopping
- PWM-compatible two‑input control per bridge (IN1/IN2) with enable for speed and direction
- Control of current decay modes (fast/slow decay) for smooth motor operation
- Protective features: undervoltage lockout, overcurrent/short-circuit protection, thermal shutdown
- Cross-conduction protection and fault handling
- Package: PWP (PowerPad) for enhanced thermal performance
Note: Always verify exact electrical specs (Imax, voltage range, decay modes) from the latest TI datasheet for your specific revision.

Package

DRV8833PWP comes in a 16‑pin HTSSOP (Thin Shrink Small Outline Package) with an exposed pad.

Pinout

- Pin count: 16 pins (HTSSOP-16 / PWP package).
- Function: Dual H-bridge motor driver. It drives two brushed DC motors (or one stepper) via two independent bridges; each bridge is controlled by input pins (two per channel) with PWM capability. Uses VM for motor supply and VDD/VCC for logic, with ground and protection/enable-related pins.

Manufacturer

- Manufacturer: Texas Instruments (TI).
- Company type: American multinational semiconductor company that designs and manufactures integrated circuits, especially analog and embedded processing solutions; one of the world’s largest semiconductor makers.

Application

- Dual H-bridge controller for brushed DC motors or one two-phase stepper motor
- Small robotics: wheeled robots, grippers
- Hobby electronics and educational kits
- Printers/plotters and compact CNC/XY tables
- Fans, pumps, and other low-voltage motor-control tasks

Equivalent

Possible equivalents (dual H-bridge/stepper drivers) to DRV8833PWP include:
- TI DRV8834 (1.5 A per bridge)
- TI DRV8825 (2.2 A peak per coil, 1/32 microsteps)
- Allegro A4988 (2 A peak, 1/16 microsteps)
- Toshiba TB6612FNG (dual H-bridge, ~1.2 A per channel, 3.2 A peak)
- ST L298N (dual full-bridge, ~2 A per bridge)
Note: specs differ (current, microstepping, interfaces); choose by voltage, current, and control method.

Versand

VersandmethodenWir

bieten Sie globale Versanddienstleistungen durch DHL, FedEx, TNT, UPS oder einen anderen Spediteur Ihrer Wahl.


Versandgebührenreferenz (DHL/FedEx):

DHL: Versandkosten reichen von $25-$45 (0.5kg), mit einer geschätzten Lieferzeit von 2-5 Werktagen.

von FedEx: Versandkosten reichen von $25-$40 (0.5kg), mit einer geschätzten Lieferzeit von 3-7 Werktagen.

UPS: Versandkosten reichen von $25-$45 (0.5kg), mit einer geschätzten Lieferzeit von 3-7 Werktagen.

TNT: Versandkosten reichen von $25-$65 (0.5kg), mit einer geschätzten Lieferzeit von 3-7 Werktagen.

EMS: Versandkosten reichen von $30-$50 (0.5kg), mit einer geschätzten Lieferzeit von 7-15 Werktagen.

Registrierte Luftpost: Versandkosten sind $ 2- $ 4 (0,1 kg), mit einer geschätzten Lieferzeit von 5-20 Werktagen.

Zahlungen

Payment Methods

Die Zahlungsfrist ist 100% Prepaid.

Derzeit akzeptieren wir nur die folgenden Zahlungsmethoden:

1. PayPal

2. Kredit- / Debitkarte

3. Überweisung

Ähnliche