GD25B16ETIGR

Bilder sind nur zur Referenz

GD25B16ETIGR

IC FLASH 16MBIT SPI/QUAD 8SOP

  • Hersteller
  • Fr. Teil #GD25B16ETIGR
  • Paket
  • Datenblatt
  • Auf Lager21807

100% Original und Neu

24 Stunden bereit zum Versand

365 Tage Garantie

RFQ & Erhalten Sie mehr Rabatte

Spezifikationen

Series GD25B
Part Status Active
Base Product Number GD25B16
Memory Type Non-Volatile
Memory Format FLASH
Technology FLASH - NOR (SLC)
Memory Size 16Mbit
Memory Organization 2M x 8
Memory Interface SPI - Quad I/O
Clock Frequency 133 MHz
Write Cycle Time - Word, Page 70µs, 2ms
Voltage - Supply 2.7V ~ 3.6V
Operating Temperature -40°C ~ 85°C (TA)
Mounting Type Surface Mount
Package 8-SOIC (0.154", 3.90mm Width)
Supplier Device Package 8-SOP
Packaging Cut Tape (CT), Tape & Reel (TR)
Access Time 7 ns

Übersicht

Description

GD25B16ETIGR is a GigaDevice 16‑Mbit serial flash memory (2 MBytes) accessed over a standard SPI interface. It provides non‑volatile storage for code and data, with common features such as 256‑byte page programming, 4 KB sectors and 64 KB blocks erase, write enable/disable, and status/config registers with protection. It supports typical SPI command sequences (READ, FAST READ, PAGE PROGRAM, SECTOR/ BLOCK ERASE, etc.) and offers low‑power modes and deep power‑down. The ETIGR suffix indicates packaging (generally an 8‑pin package) and an industrial/extended temperature grade. Operating voltage is typically 2.7–3.6 V (variant dependent). Use cases include firmware storage and bootloaders, configuration data, and data logging in microcontroller systems. For exact timing, endurance, voltage range, pinout, and packaging details, consult the GD25B16ETIGR datasheet and packaging documentation.

Features

Here are the typical features of GD25B16ETIGR (GigaDevice 16-Mbit SPI Serial Flash, ROHS, 8-pin):
- Capacity: 16 Mbit (2 MB) serial flash memory
- Interface: Serial SPI (standard SPI); 3-byte addressing; supports fast read
- Supply/IO voltage: 2.7V–3.6V operation
- Memory organization: 256-byte pages; 4 KB sectors; 64 KB blocks; whole-device erase
- Speed: high-speed read up to around 100+ MHz (typical values stated in datasheet)
- Endurance/Data retention: erase/program endurance ~100k cycles per sector; data retention about 20 years at room temp
- Power modes: normal read, and deep power-down mode
- Protections: WP# and HOLD# pins; block-protection and software/ hardware protection features; JEDEC ID
- Additional: Power-on reset (POR); ready/busy status; UID/Device ID options
- Operating range: -40°C to +85°C (industrial)
- Package: 8-pin RoHS-compliant (GR suffix) small-outline package
Note: exact timing and feature details vary by revision—consult the latest datasheet for precise specs.

Package

It comes in an 8-pin SOP (SOIC) package.

Pinout

- Pin count: 8 pins (8-pin SPI flash package).
- Function: 16 Mbit serial (SPI) non-volatile flash memory device used to store code/data; supports standard SPI read/write/erase operations (CS, CLK, DI, DO, VCC, GND, plus WP/HOLD).

Manufacturer

Manufacturer: GigaDevice Semiconductor Inc. (GigaDevice).
What kind of company: A Chinese fabless semiconductor company that designs and markets non-volatile memory products (notably serial flash) and microcontrollers, outsourcing wafer fabrication to foundries.

Application

GD25B16ETIGR is a 16‑Mbit SPI serial flash. Typical applications include:
- Boot and program memory for microcontrollers/SoCs
- Firmware storage and updates in embedded devices
- Code and data storage for consumer electronics
- Data logging, scratchpad, and configuration memory
- Small-footprint firmware and caching for networking/IoT devices and USB peripherals

Equivalent

Equivalent 16-Mbit SPI NOR flash parts from other vendors (3.3V, 8-pin):
- Winbond W25Q16BV/W25Q16JV
- Macronix MX25L16
- Spansion S25FL116K
- ISSI IS25LP016D
- Fudan Micro FM25L16
Note: check voltage, timing, and package compatibility; cross-reference part numbers can vary by supplier.

Versand

VersandmethodenWir

bieten Sie globale Versanddienstleistungen durch DHL, FedEx, TNT, UPS oder einen anderen Spediteur Ihrer Wahl.


Versandgebührenreferenz (DHL/FedEx):

DHL: Versandkosten reichen von $25-$45 (0.5kg), mit einer geschätzten Lieferzeit von 2-5 Werktagen.

von FedEx: Versandkosten reichen von $25-$40 (0.5kg), mit einer geschätzten Lieferzeit von 3-7 Werktagen.

UPS: Versandkosten reichen von $25-$45 (0.5kg), mit einer geschätzten Lieferzeit von 3-7 Werktagen.

TNT: Versandkosten reichen von $25-$65 (0.5kg), mit einer geschätzten Lieferzeit von 3-7 Werktagen.

EMS: Versandkosten reichen von $30-$50 (0.5kg), mit einer geschätzten Lieferzeit von 7-15 Werktagen.

Registrierte Luftpost: Versandkosten sind $ 2- $ 4 (0,1 kg), mit einer geschätzten Lieferzeit von 5-20 Werktagen.

Zahlungen

Payment Methods

Die Zahlungsfrist ist 100% Prepaid.

Derzeit akzeptieren wir nur die folgenden Zahlungsmethoden:

1. PayPal

2. Kredit- / Debitkarte

3. Überweisung

Ähnliche