GD25LQ64ENIGR

Bilder sind nur zur Referenz

GD25LQ64ENIGR

IC FLASH 64MBIT SPI/QUAD 8USON

  • Hersteller
  • Fr. Teil #GD25LQ64ENIGR
  • Paket
  • Datenblatt
  • Auf Lager25744

100% Original und Neu

24 Stunden bereit zum Versand

365 Tage Garantie

RFQ & Erhalten Sie mehr Rabatte

Spezifikationen

Series GD25LQ
Part Status Active
Base Product Number GD25LQ64
Memory Type Non-Volatile
Memory Format FLASH
Technology FLASH - NOR (SLC)
Memory Size 64Mbit
Memory Organization 8M x 8
Memory Interface SPI - Quad I/O, QPI
Clock Frequency 133 MHz
Write Cycle Time - Word, Page 60µs, 2.4ms
Voltage - Supply 1.65V ~ 2V
Operating Temperature -40°C ~ 85°C (TA)
Mounting Type Surface Mount
Package 8-UDFN Exposed Pad
Supplier Device Package 8-USON (3x4)
Packaging Tape & Reel (TR)
Access Time 6 ns

Übersicht

Description

GD25LQ64ENIGR is a 64-Mbit serial flash memory from GigaDevice, intended for firmware storage, code boot, and data logging. It uses a serial SPI interface (supports standard SPI and dual/quad I/O read modes) and stores 8 MB of non-volatile data.
Key points:
- Capacity and addressing: 64 Mbit with 3-byte addressing (up to 16 MB address space, suitable for current MCU interfaces).
- Organization and operations: 256-byte page programming; erase operations for 4 KB sectors, 32 KB/64 KB blocks, and a full-chip erase.
- Performance: fast read options, high clock rates in drive-by-mode families; supports Deep Power-Down to save energy.
- Endurance and retention: typical program/erase endurance in the tens to hundreds of thousands of cycles; data retention typically many years.
- Power and packaging: operates from a single supply in the ~2.7–3.6 V range (variants exist); packaged in an 8-pin ENIGR form factor.
Typical uses: firmware storage, boot loaders, and data logging in microcontroller-based systems.

Features

Key features of GD25LQ64ENIGR (64 Mbit serial flash):
- Density: 64 Mbit (8 MB) of non-volatile flash memory.
- Interface: SPI-compatible with standard, dual-SPI, and quad-SPI I/O modes.
- Supply and range: 2.7–3.6 V operation (3.3 V nominal); -40 °C to 85 °C industrial temp range.
- Read speed: Fast/continuous read up to 104 MHz; supports various read modes.
- Organization: 256-byte page size; 4 KB sectors; 64 KB blocks (and sector/block protection options).
- Program/erase: Page program (256 bytes); sector erase; block erase.
- Power modes: Deep power-down for low current; normal standby modes.
- Security and protection: Write enable, status register, block/sector protection, and security features.
- Packaging: 8-pin RoHS-compliant package (e.g., SOIC/8-pin variants).
- Reliability: Data retention typically long-term; erase/write endurance in the typical flash range (consult datasheet for exact figures).
Note: Always verify exact electrical/timing figures in the latest datasheet for kernel design margins.

Package

GD25LQ64ENIGR uses an 8-pin SOP (SOIC-8) package; RoHS-compliant, supplied in Tape & Reel.

Pinout

- Pin count: 8 pins (SOP-8).
- Function: 64-Mbit serial flash memory (non-volatile) with an SPI-compatible interface (CS, MOSI, MISO, SCK) plus WP and HOLD pins, used to store firmware/data.

Manufacturer

Manufacturer: GigaDevice Semiconductor Inc. (GigaDevice).
What kind of company: A Chinese fabless semiconductor company that designs and markets non-volatile memory (NOR flash) and microcontroller products, including serial flash like the GD25LQ64ENIGR, and uses foundries for manufacturing.

Application

GD25LQ64ENIGR is a 64‑Mbit SPI serial flash memory. Common application areas:
- Boot memory and firmware storage for microcontrollers/SoCs
- Firmware updates and recovery (FOTA)
- Code/data storage in embedded systems (IoT, consumer electronics, industrial, automotive)
- Non-volatile data logging and configuration storage
- Asset tagging and digital storage in cameras, wearables, and similar devices

Equivalent

Common 64-Mbit SPI NOR flash equivalents (same density and interface):
- Winbond W25Q64JV / W25Q64JVSSIG
- Macronix MX25L64F
- Spansion/Cypress S25FL064P
- ISSI IS25LP064A
- Micron N25Q064A
- SST SST25VF064C
These offer similar 3V SPI/dual-quad capabilities and 64 Mbit capacity.

Versand

VersandmethodenWir

bieten Sie globale Versanddienstleistungen durch DHL, FedEx, TNT, UPS oder einen anderen Spediteur Ihrer Wahl.


Versandgebührenreferenz (DHL/FedEx):

DHL: Versandkosten reichen von $25-$45 (0.5kg), mit einer geschätzten Lieferzeit von 2-5 Werktagen.

von FedEx: Versandkosten reichen von $25-$40 (0.5kg), mit einer geschätzten Lieferzeit von 3-7 Werktagen.

UPS: Versandkosten reichen von $25-$45 (0.5kg), mit einer geschätzten Lieferzeit von 3-7 Werktagen.

TNT: Versandkosten reichen von $25-$65 (0.5kg), mit einer geschätzten Lieferzeit von 3-7 Werktagen.

EMS: Versandkosten reichen von $30-$50 (0.5kg), mit einer geschätzten Lieferzeit von 7-15 Werktagen.

Registrierte Luftpost: Versandkosten sind $ 2- $ 4 (0,1 kg), mit einer geschätzten Lieferzeit von 5-20 Werktagen.

Zahlungen

Payment Methods

Die Zahlungsfrist ist 100% Prepaid.

Derzeit akzeptieren wir nur die folgenden Zahlungsmethoden:

1. PayPal

2. Kredit- / Debitkarte

3. Überweisung

Ähnliche