IR2520DSTRPBF

Bilder sind nur zur Referenz

IR2520DSTRPBF

IC BALLAST CNTRL 86KHZ 8SOIC

100% Original und Neu

24 Stunden bereit zum Versand

365 Tage Garantie

RFQ & Erhalten Sie mehr Rabatte

Spezifikationen

Package Tape & Reel (TR),Cut Tape (CT)
ProductStatus Active
Type Ballast Controller
Frequency 34kHz ~ 86kHz
Voltage-Supply 11.4V ~ 15.4V
Current-Supply 10 mA
Dimming No
OperatingTemperature -25°C ~ 125°C
MountingType Surface Mount
Package/Case 8-SOIC (0.154, 3.90mm Width)

Übersicht

Description

The IR2520DSTRPBF is an integrated circuit produced by Infineon Technologies, designed for use in fluorescent lamp ballasts. It is an energy-efficient ballast control IC that provides preheat, ignition, and run modes for fluorescent lamps. The device includes features such as programmable preheat and ignition timing, adaptive dead-time control, and protection against lamp failure conditions. It is packaged in a small 8-pin SOIC (Small Outline Integrated Circuit) form factor.
Key features of the IR2520DSTRPBF include a high-voltage half-bridge gate driver, low start-up current, and a built-in oscillator. These features enable it to drive a wide range of lamps while minimizing power consumption. The IC also includes safety functions like protection against over-current and open-load conditions, enhancing the reliability and lifespan of the lighting system.
The IR2520DSTRPBF is commonly used in compact fluorescent lamp ballasts and can be found in both residential and commercial lighting applications, where energy efficiency and reliable operation are crucial.

Features

The IR2520DSTRPBF is a high-voltage, self-oscillating half-bridge driver IC manufactured by Infineon Technologies. Key features include:
1. Self-Oscillating Control: Incorporates a self-oscillating circuit that simplifies design by eliminating the need for an external oscillator.
2. High-Voltage Rating: Capable of handling high-voltage applications, making it suitable for driving half-bridge configurations in lighting ballast and motor control designs.
3. Integrated Bootstrap Diode: Simplifies the design and reduces component count by including an internal bootstrap diode.
4. Undervoltage Lockout (UVLO): Protects the IC from operating below specified voltage levels, enhancing reliability.
5. Micropower Startup: Ensures low power consumption during startup phases, improving efficiency.
6. Latch Immunity and ESD Protection: Enhanced robustness and reliability with built-in protection against latch-up and electrostatic discharge.
7. Deadtime Capability: Provides programmable deadtime to avoid shoot-through conditions, improving safety and reliability.
8. Compact Package: Available in a surface-mount package, facilitating compact design implementations.
These features make the IR2520DSTRPBF suitable for applications like CFL ballasts, LED drivers, and various motor drive systems that require efficient high-voltage operation.

Package

The IR2520DSTRPBF is packaged in an 8-Lead SOIC (Small Outline Integrated Circuit) package. This surface-mount package type is commonly used for integrated circuits and provides a compact footprint suitable for various electronic applications.

Pinout

The IR2520DSTRPBF is an 8-pin device. It is an integrated high-voltage, high-speed Power Factor Correction (PFC) controller designed for use in boost PFC applications. Its primary function is to improve power factor and reduce total harmonic distortion in power supply applications by controlling the boost converter stage efficiently. The IR2520DSTRPBF incorporates features such as programmable switching frequency, soft-start, over-voltage protection, and under-voltage lockout, making it suitable for use in a wide range of lighting and power supply systems.

Manufacturer

The IR2520DSTRPBF is manufactured by Infineon Technologies. Infineon is a German semiconductor company that specializes in the design, development, and manufacture of a wide range of semiconductor solutions. Their products are used in various applications, including automotive electronics, industrial power control, chip card and security applications, and power management systems. Infineon is known for its focus on energy efficiency, mobility, and security, providing technologies that help shape and improve our modern connected world.

Application

The IR2520DSTRPBF is commonly used in lighting applications such as electronic ballasts for fluorescent lamps and LED drivers. It is designed for high frequency fluorescent lamp control and dimming applications. The device features include protection and control functions, making it suitable for energy-efficient lighting solutions.

Equivalent

The IR2520DSTRPBF is a high-voltage, high-speed power MOSFET driver with a programmable oscillator, typically used for driving fluorescent and LED lamps. Equivalent products may include other high-voltage half-bridge drivers with similar functionality. Some alternatives are the UCC27712 from Texas Instruments, FAN7390 from ON Semiconductor, and L6385E from STMicroelectronics. Ensure to compare specifications like voltage rating, current capacity, and package type to confirm compatibility.

Versand

VersandmethodenWir

bieten Sie globale Versanddienstleistungen durch DHL, FedEx, TNT, UPS oder einen anderen Spediteur Ihrer Wahl.


Versandgebührenreferenz (DHL/FedEx):

DHL: Versandkosten reichen von $25-$45 (0.5kg), mit einer geschätzten Lieferzeit von 2-5 Werktagen.

von FedEx: Versandkosten reichen von $25-$40 (0.5kg), mit einer geschätzten Lieferzeit von 3-7 Werktagen.

UPS: Versandkosten reichen von $25-$45 (0.5kg), mit einer geschätzten Lieferzeit von 3-7 Werktagen.

TNT: Versandkosten reichen von $25-$65 (0.5kg), mit einer geschätzten Lieferzeit von 3-7 Werktagen.

EMS: Versandkosten reichen von $30-$50 (0.5kg), mit einer geschätzten Lieferzeit von 7-15 Werktagen.

Registrierte Luftpost: Versandkosten sind $ 2- $ 4 (0,1 kg), mit einer geschätzten Lieferzeit von 5-20 Werktagen.

Zahlungen

Payment Methods

Die Zahlungsfrist ist 100% Prepaid.

Derzeit akzeptieren wir nur die folgenden Zahlungsmethoden:

1. PayPal

2. Kredit- / Debitkarte

3. Überweisung