IS45S16400F-7TLA1

The IS45S16400F-7TLA1 is a high-speed, low-power SDRAM (Synchronous Dynamic Random-Access Memory) chip manufactured by ISSI (Integrated Silicon Solution, Inc.). This component is designed for applications requiring efficient data storage and retrieval, such as in consumer electronics, communications, and industrial systems.
Key features of the IS45S16400F-7TLA1 include:
1. Density and Configuration: It has a 64Mb capacity, organized as 4M x 16 bits.
2. Speed: The “-7” in its part number denotes a 143 MHz clock speed, ensuring rapid data processing and access.
3. Power: This SDRAM is known for its low power consumption, making it suitable for battery-operated devices.
4. Package Type: The “TLA1” indicates a TSOP II (Thin Small Outline Package) with a 50-pin configuration, facilitating easy integration onto circuit boards.
5. Performance: It supports burst read and write operations, improving throughput, and features auto-refresh and self-refresh modes for enhanced data retention.
Overall, the IS45S16400F-7TLA1 is a reliable choice for applications requiring a balance of speed, efficiency, and power savings.

The IS45S16400F-7TLA1 is a DRAM chip with a TSOP (Thin Small Outline Package) type. Specifically, it's a 54-pin TSOP-II package.

The IS45S16400F-7TLA1 is a 64Mbit SDRAM (Synchronous Dynamic Random Access Memory) organized as 4M x 16 bits. It comes in a 54-pin TSOP II package. The pin functions typically include:
1. Power Supply Pins:
- VCC and VSS for power and ground.

2. Data Pins:
- DQ0 to DQ15 for data input/output.
3. Address Pins:
- A0 to A11 for the row and column addresses.

4. Control Pins:
- /CS (Chip Select): Enables the chip.
- /RAS (Row Address Strobe): Activates the row address.
- /CAS (Column Address Strobe): Activates the column address.
- /WE (Write Enable): Controls read/write operations.

5. Clock and Other Pins:
- CLK for clock input.
- CKE (Clock Enable) to enable/disable the clock signal.
- /DQM for data mask control, used to selectively block data input/output.
This SDRAM is used in applications requiring high-speed memory and is typically found in computing and consumer electronics devices for efficient data management.

The IS45S16400F-7TLA1 is manufactured by ISSI (Integrated Silicon Solution, Inc.). ISSI is a technology company that specializes in designing and developing high-performance integrated circuits. The company focuses primarily on four key product areas: DRAM, SRAM, flash memory, and analog and mixed-signal integrated circuits. ISSI serves a variety of markets, including automotive, communications, industrial, and digital consumer products, providing memory solutions that are often optimized for specific applications requiring long lifecycle support, reliability, and extended temperature ranges.

The IS45S16400F-7TLA1 is a 64Mb SDRAM commonly used in applications requiring moderate memory capacity and speed. Its application areas include consumer electronics, automotive systems, industrial automation, networking equipment, and embedded systems. It is suitable for use in devices such as digital cameras, set-top boxes, printers, and other electronic devices that require efficient memory management for moderate data processing tasks.

The IS45S16400F-7TLA1 is a 64Mb SDRAM from ISSI. Equivalent products include Micron's MT48LC16M4A2, Samsung's K4S561632J, and Hynix's HY57V643220H. These chips share similar specifications, such as being 64Mb (4M x 16) SDRAMs with compatible voltage and speed ratings, making them potential substitutes. Always verify pin compatibility and specific application requirements before substituting.