LTM8060EY#PBF

LTM8060EY#PBF is a Linear/Analog Devices µModule DC-DC regulator. It’s a fully integrated high‑voltage switcher (60 V input) with the power MOSFETs, inductor, controller, and essential passives inside a single module. It provides a high-current, low‑voltage output from a 60 V bus, with protection features (overcurrent, overtemperature, short-circuit), soft‑start, enable, and, in many variants, remote sense/feedback. External parts are minimal (usually only input/output capacitors and a feedback/set resistor if the output is adjustable). The EY and #PBF suffixes denote the specific Pb‑free (RoHS) package option and footprint. Typical applications include automotive or industrial power rails feeding FPGAs, processors, or other high‑performance loads from a 60 V supply. For exact voltage options, current rating, and pinout, refer to the datasheet for the LTM8060EY variant you’re using.

Key features of LTM8060EY#PBF (µModule regulator):
- Wide input range: up to 60 V
- High-current output: up to several amperes (typical use is around 6 A per module; check datasheet for exact rating)
- Synchronous buck regulator in a single µModule package (integrated MOSFETs, inductor, and passive components)
- Adjustable output via external feedback resistors (typical 0.8 V to ~5 V range)
- Remote sense and accurate output regulation
- Enable input with soft-start control
- Protections: overcurrent/short-circuit, overvoltage, undervoltage lockout, and overtemperature/thermal shutdown
- Fast dynamic response with good stability
- High efficiency (typical well above 90%; depends on conditions)
- Fixed switching frequency in the MHz range (typical 1–2 MHz)
- PGOOD/status indicator output
- RoHS-compliant lead-free package (EY) suitable for compact designs
- No external inductor or most passives required (simplifies board layout)
Note: exact output current, voltage range, and switching frequency depend on the specific variant. For precise numbers, please consult the LTM8060EY#PBF datasheet.

Pb-free 60-pin BGA package (9×9 mm).

I don’t have the LTM8060EY#PBF datasheet loaded. Would you like me to look up the exact package pin count and pin-by-pin functions now?

- Manufacturer: Analog Devices, Inc. (formerly Linear Technology).
- What kind of company: An American multinational semiconductor company that designs and manufactures analog, mixed-signal, and DSP integrated circuits, including µModule regulators.

Applications:
- Point-of-load buck regulator for 60V rail systems
- Telecom and networking equipment
- Industrial automation and robotics
- Data-center servers and storage
- Automotive/rail electronics (48–60V input)