MIC2095-1YMT-TR

Bilder sind nur zur Referenz

MIC2095-1YMT-TR

IC PWR SWITCH P-CHAN 1:1 6TMLF

100% Original und Neu

24 Stunden bereit zum Versand

365 Tage Garantie

RFQ & Erhalten Sie mehr Rabatte

Spezifikationen

Package Tape & Reel (TR),Cut Tape (CT)
ProductStatus Active
SwitchType General Purpose
NumberofOutputs 1
Ratio-Input:Output 1:1
OutputConfiguration High Side
OutputType P-Channel
Interface On/Off
Voltage-Load 2.5V ~ 5.5V
Voltage-Supply(Vcc/Vdd) Not Required
Current-Output(Max) 500mA
RdsOn(Typ) 170mOhm
InputType Non-Inverting
Features Slew Rate Controlled
FaultProtection Current Limiting (Fixed), Over Temperature, UVLO
OperatingTemperature -40°C ~ 125°C (TJ)
MountingType Surface Mount
SupplierDevicePackage 6-TMLF® (1.6x1.6)

Übersicht

Description

MIC2095-1YMT-TR is Microchip’s MIC2095 family single-channel high-side load switch. It integrates a high-side FET with built-in protection and current limiting to switch power to a load from a higher supply. Key features typically include overcurrent protection, thermal shutdown, undervoltage lockout, and an enable control. The “-1” indicates one channel; “YMT” is the package code, and “-TR” denotes tape-and-reel packaging. Used for automotive or portable electronics to protect and control loads (LEDs, solenoids, small motors, etc.). For exact specs (voltage/current range, Rds(on), quiescent current), consult the MIC2095 datasheet.

Features

Here are the typical features of the MIC2095-1YMT-TR (per datasheet family):
- High-efficiency step-down (buck) regulator with an integrated switch
- Current-mode control for fast transient response
- External feedback for adjustable output (and variants with fixed outputs)
- Enable/shutdown control
- Soft-start to limit inrush
- Overcurrent/short-circuit protection
- Overtemperature (thermal) shutdown
- Undervoltage lockout
- Wide input range (supports a broad supply range)
- External compensation options via RC network for stable operation
- Built-in protection features such as reverse-current protection
- Package: MIC2095 in the YMT package, tape-and-reel (TR) delivery
Note: for exact output voltage options, input range, switching frequency, and pinout, please refer to the latest datasheet.

Package

8‑pin MSOP package (MSOP-8), Tape & Reel (code YMT).

Pinout

- Pin count: 8 pins (8-pin package; -TR denotes Tape & Reel; YMT is package code)
- Function: MOSFET gate driver for switching regulators (external N-channel MOSFET drive). Provides gate drive output plus typical control pins (input, enable, supply, ground, and feedback/diagnostic pins).

Manufacturer

- Manufacturer: Microchip Technology Inc. (the MIC prefix comes from Micrel, Inc., which Microchip acquired in 2015).
- What kind of company: A global semiconductor company that designs and manufactures analog, mixed-signal, and power-management ICs, as well as microcontrollers, memory, and related solutions.

Application

Typical application areas for MIC2095-1YMT-TR:
- High-efficiency DC–DC buck regulators
- LED backlight and LED driver circuits
- Power management for portable/battery-powered devices
- Automotive and industrial power supplies
- Telecom/network equipment DC-DC front ends
- General high-efficiency power conversion in consumer electronics

Versand

VersandmethodenWir

bieten Sie globale Versanddienstleistungen durch DHL, FedEx, TNT, UPS oder einen anderen Spediteur Ihrer Wahl.


Versandgebührenreferenz (DHL/FedEx):

DHL: Versandkosten reichen von $25-$45 (0.5kg), mit einer geschätzten Lieferzeit von 2-5 Werktagen.

von FedEx: Versandkosten reichen von $25-$40 (0.5kg), mit einer geschätzten Lieferzeit von 3-7 Werktagen.

UPS: Versandkosten reichen von $25-$45 (0.5kg), mit einer geschätzten Lieferzeit von 3-7 Werktagen.

TNT: Versandkosten reichen von $25-$65 (0.5kg), mit einer geschätzten Lieferzeit von 3-7 Werktagen.

EMS: Versandkosten reichen von $30-$50 (0.5kg), mit einer geschätzten Lieferzeit von 7-15 Werktagen.

Registrierte Luftpost: Versandkosten sind $ 2- $ 4 (0,1 kg), mit einer geschätzten Lieferzeit von 5-20 Werktagen.

Zahlungen

Payment Methods

Die Zahlungsfrist ist 100% Prepaid.

Derzeit akzeptieren wir nur die folgenden Zahlungsmethoden:

1. PayPal

2. Kredit- / Debitkarte

3. Überweisung

Ähnliche