MOC3052M

Bilder sind nur zur Referenz

MOC3052M

OPTOISOLATOR 5KV TRIAC 1CH 6-DIP

100% Original und Neu

24 Stunden bereit zum Versand

365 Tage Garantie

RFQ & Erhalten Sie mehr Rabatte

Spezifikationen

Series MOC305x
Part Status Active
Output Type Triac
Zero Crossing Circuit No
Number of Channels 1
Voltage - Isolation 5000Vrms
Voltage - Off State 600 V
Static dV/dt (Min) 1kV/µs
Current - LED Trigger (Ift) (Max) 10mA
Current - Hold (Ih) 400µA (Typ)
Voltage - Forward (Vf) (Typ) 1.2V
Current - DC Forward (If) (Max) 50 mA
Operating Temperature -40°C ~ 100°C
Mounting Type Through Hole
Package / Case 6-DIP (0.400", 10.16mm)
Supplier Device Package 6-DIP
Approval Agency CSA, FIMKO, UL
Base Product Number MOC305

Übersicht

Description

The MOC3052M is an optoisolator or optocoupler, designed specifically for interfacing between high-voltage and low-voltage circuits while providing electrical isolation. It features a GaAlAs infrared LED and a phototransistor in a single package. The device is commonly used in applications such as switch mode power supplies, motor control, and signal isolation in telecommunications.
The MOC3052M can handle significant voltage and current levels, making it suitable for industrial and consumer applications. Its isolation voltage typically ranges from 5,000 to 10,000 volts, ensuring safe operation in critical applications. The device also has a fast response time, which allows for high-speed data transmission.
Key features include a high current transfer ratio, low input current requirement, and a wide temperature range for reliable performance in various environments. Overall, the MOC3052M is a versatile component for achieving safety and signal integrity in electronic designs.

Features

The MOC3052M is an optoisolator, also known as an optocoupler, specifically designed for interfacing high-voltage AC loads with low-voltage control circuits. Key features include:
1. Isolation Voltage: Provides electrical isolation between input and output, typically rated at 5,000 VRMS.
2. Voltage Rating: It can handle AC voltages up to 600V.
3. Output Configuration: Contains a phototransistor output that can switch AC loads.
4. Triggering Current: Requires a low input current to activate, typically in the range of a few milliamperes.
5. High Speed: Capable of operating at frequencies up to 10 kHz, making it suitable for various applications.
6. Package Type: Available in a compact DIP-4 package, allowing for efficient space utilization on PCBs.
7. Temperature Range: Operates effectively over a wide temperature range, ensuring reliability in various environments.
These features make the MOC3052M ideal for applications like solid-state relays, motor control, and lighting control systems.

Package

The MOC3052M is commonly packaged in a DIP-6 (Dual In-Line Package with 6 pins). This form factor allows for easy integration into circuit boards.

Pinout

The MOC3052M is an optoisolator (opto-coupler) with a total of 6 pins. Its primary function is to provide electrical isolation between its input and output while allowing signal transfer.
Pin Configuration:
1. Anode (A) – Connects to the positive side of the input LED.
2. Cathode (K) – Connects to the negative side of the input LED.
3. Emitter (E) – The output transistor's emitter, usually connected to ground.
4. Collector (C) – The output transistor's collector, connected to the load.
5. Base (B) – Used to control the output transistor’s gain, typically left floating unless used for specific applications.
6. Case (C) – The package case serves as a heat sink and protection.
The MOC3052M is popular for switching applications and interfacing low-voltage circuits with high-voltage circuits while ensuring safety and signal integrity.

Manufacturer

The MOC3052M is manufactured by Broadcom Inc., a global technology company primarily known for its semiconductor and infrastructure software solutions. Broadcom designs and develops a wide range of products for various applications, including data center, networking, software, broadband, wireless, and storage. The company emerged from the merger of Avago Technologies and Broadcom Corporation and has since become a significant player in the electronics industry, focusing on innovation and integration of complex technologies to support diverse market needs.

Application

The MOC3052M is an optoisolator with a triac output, commonly used in applications such as AC motor control, light dimming, solid-state relay (SSR) design, and interface circuits for microcontrollers to AC loads. It provides electrical isolation between low-voltage control circuits and high-voltage AC systems, making it ideal for automation, home appliances, and industrial control systems.

Equivalent

The MOC3052M is an optoisolator with a triac output. Equivalent products include:
1. MOC3063
2. MOC3062
3. MOC3061
These alternatives may have different current ratings or input-output configurations, so always verify specifications for your specific application needs.

Versand

VersandmethodenWir

bieten Sie globale Versanddienstleistungen durch DHL, FedEx, TNT, UPS oder einen anderen Spediteur Ihrer Wahl.


Versandgebührenreferenz (DHL/FedEx):

DHL: Versandkosten reichen von $25-$45 (0.5kg), mit einer geschätzten Lieferzeit von 2-5 Werktagen.

von FedEx: Versandkosten reichen von $25-$40 (0.5kg), mit einer geschätzten Lieferzeit von 3-7 Werktagen.

UPS: Versandkosten reichen von $25-$45 (0.5kg), mit einer geschätzten Lieferzeit von 3-7 Werktagen.

TNT: Versandkosten reichen von $25-$65 (0.5kg), mit einer geschätzten Lieferzeit von 3-7 Werktagen.

EMS: Versandkosten reichen von $30-$50 (0.5kg), mit einer geschätzten Lieferzeit von 7-15 Werktagen.

Registrierte Luftpost: Versandkosten sind $ 2- $ 4 (0,1 kg), mit einer geschätzten Lieferzeit von 5-20 Werktagen.

Zahlungen

Payment Methods

Die Zahlungsfrist ist 100% Prepaid.

Derzeit akzeptieren wir nur die folgenden Zahlungsmethoden:

1. PayPal

2. Kredit- / Debitkarte

3. Überweisung

Ähnliche