MP3398AGS-Z

Bilder sind nur zur Referenz

MP3398AGS-Z

IC LED DRV CTRL PWM 350MA 16SOIC

  • Hersteller
  • Fr. Teil #MP3398AGS-Z
  • Paket SOIC-16
  • Datenblatt
  • Auf Lager6199

100% Original und Neu

24 Stunden bereit zum Versand

365 Tage Garantie

RFQ & Erhalten Sie mehr Rabatte

Spezifikationen

Package Tape & Reel (TR)
ProductStatus Active
Type DC DC Controller
Topology Step-Up (Boost)
InternalSwitch(s) No
NumberofOutputs 4
Voltage-Supply(Min) 5V
Voltage-Supply(Max) 28V
Current-Output/Channel 350mA
Frequency 540kHz
Dimming Analog, PWM
Applications Backlight
OperatingTemperature -40°C ~ 125°C (TJ)
MountingType Surface Mount
Package/Case 16-SOIC (0.154, 3.90mm Width)

Übersicht

Description

MP3398AGS-Z is a high-performance motor-driver IC from Monolithic Power Systems (MPS) designed to drive brushless DC motors and stepper motors with integrated power MOSFETs. It provides efficient, compact motor control with minimal external components.
Key points
- Integrated power bridge: N-channel MOSFETs for smooth, high-current motor drive
- Adjustable current limit via sense resistor
- Protection: undervoltage lockout, overcurrent, overtemperature/overvoltage
- Supports motor-drive features such as microstepping/decay options for smooth motion
- Suitable for compact, low-footprint applications
Packaging
- AGS-Z denotes a RoHS-compliant, compact QFN-style package variant with specific lead/frame options (check datasheet for exact pinout and packaging details)
Typical applications
- Robotics, printers, CNC/automation, and other precision motor-control tasks
Note
- For exact electrical specs (voltage range, peak/current ratings) and pinout, refer to the MP3398AGS-Z datasheet and product brief.

Features

Key features of MP3398AGS-Z (summary):
- 3-phase brushless DC motor driver with integrated MOSFETs
- Wide supply range (approximately 4.5–28 V)
- Programmable peak current with accurate current regulation
- PWM control with selectable decay modes; supports smooth sine/six-step commutation
- Sensorless commutation using back-EMF detection for startup and run
- Built-in protection: overcurrent, overvoltage, undervoltage, overtemperature; short-circuit protection
- Fault diagnostics and status outputs for monitoring
- Enable (EN) and DIR/PWM-style control interface for direction and speed
- Compact AGS-Z package (QFN-style) with good thermal performance
Note: For exact electrical specs, pinout, and programming registers, refer to the MP3398AGS-Z datasheet.

Package

QFN package (QFN-20, approx. 4x4 mm) with an exposed pad.

Pinout

- Pin count: 28 pins (QFN-28, MP3398AGS-Z).
- Function: 3‑phase brushless DC motor driver with six integrated MOSFETs (three half-bridges) to directly drive a BLDC motor, including current sensing and protection features (overcurrent/UVLO/thermal), with logic inputs to control motor commutation.

Manufacturer

- Manufacturer: Monolithic Power Systems (MPS).
- Company type: An American semiconductor company that designs and manufactures analog and mixed-signal ICs, specializing in power-management and motor-control devices.

Application

MP3398AGS-Z is a high-performance MEMS gyroscope (3-axis) used for precise angular rate sensing. Typical application areas:
- Drones/UAV attitude and stabilization
- Robotics and autonomous systems for motion sensing and pose estimation
- Automotive safety and ADAS sensor fusion
- Consumer electronics, AR/VR, motion controllers
- Camera stabilization and gimbals
- Inertial navigation and dead-reckoning systems
- Industrial vibration monitoring and remote sensing

Versand

VersandmethodenWir

bieten Sie globale Versanddienstleistungen durch DHL, FedEx, TNT, UPS oder einen anderen Spediteur Ihrer Wahl.


Versandgebührenreferenz (DHL/FedEx):

DHL: Versandkosten reichen von $25-$45 (0.5kg), mit einer geschätzten Lieferzeit von 2-5 Werktagen.

von FedEx: Versandkosten reichen von $25-$40 (0.5kg), mit einer geschätzten Lieferzeit von 3-7 Werktagen.

UPS: Versandkosten reichen von $25-$45 (0.5kg), mit einer geschätzten Lieferzeit von 3-7 Werktagen.

TNT: Versandkosten reichen von $25-$65 (0.5kg), mit einer geschätzten Lieferzeit von 3-7 Werktagen.

EMS: Versandkosten reichen von $30-$50 (0.5kg), mit einer geschätzten Lieferzeit von 7-15 Werktagen.

Registrierte Luftpost: Versandkosten sind $ 2- $ 4 (0,1 kg), mit einer geschätzten Lieferzeit von 5-20 Werktagen.

Zahlungen

Payment Methods

Die Zahlungsfrist ist 100% Prepaid.

Derzeit akzeptieren wir nur die folgenden Zahlungsmethoden:

1. PayPal

2. Kredit- / Debitkarte

3. Überweisung

Ähnliche