MPC8347VVALFB

Bilder sind nur zur Referenz

MPC8347VVALFB

IC MPU MPC83XX 667MHZ 672TBGA

100% Original und Neu

24 Stunden bereit zum Versand

365 Tage Garantie

RFQ & Erhalten Sie mehr Rabatte

Spezifikationen

Supplier NXP USA Inc.
Package Tray
Series MPC83xx
ProductStatus Obsolete
CoreProcessor PowerPC e300
NumberofCores/BusWidth 1 Core, 32-Bit
Speed 667MHz
RAMControllers DDR
GraphicsAcceleration No
Ethernet 10/100/1000Mbps (2)
USB USB 2.0 + PHY (2)
Voltage-I/O 2.5V, 3.3V
OperatingTemperature 0°C ~ 105°C (TA)
Package/Case 672-LBGA

Übersicht

Description

Introduction to MPC8347VVALFB
- What it is: A Freescale/NXP PowerQUICC II Pro single-chip embedded processor in the MPC83xx family, widely used in networking gear (routers, switches, gateways).
- Core: PowerPC-based e300 32-bit CPU core, designed for high-throughput embedded tasks with on-chip caches.
- Peripherals: dual Ethernet MACs (10/100/1000 Mbps), PCI/PCI-X, USB, multiple serial interfaces, on-chip DMA, timers, and memory controllers.
- Memory/I/O: integrated memory controller for DDR SDRAM/Flash and high-speed buses to off-chip memory and peripherals; cryptography/security engine in many configurations.
- Packaging/variant: VVALFB denotes a specific package/temperature/lead-free variant (industrial/extended temperature options vary by part).
- Use cases: suitable for embedded networking equipment, telecom appliances, and edge devices; widely supported by Linux, VxWorks, and Freescale/NXP BSPs.
If you need exact specs (MHz, memory sizes, number of MACs), please specify the datasheet revision or your board variant.

Features

MPC8347VVALFB — key features (PowerQUICC III Pro, 32-bit PowerPC e300 core)
- 32-bit PowerPC e300 core (high-performance in-order Power Architecture) suitable for embedded routing/switching.
- On-chip Communications Processor Module (CPM) with multiple Ethernet MACs and packet-switching support for fast network traffic handling.
- DDR2 SDRAM memory controller with ECC support (robust memory options for embedded systems).
- Rich peripheral set: USB 2.0, I2C, SPI, UARTs, GPIO, plus multiple serial interfaces and timers.
- Networking accelerators: support for jumbo frames, traffic management, and PHY interfaces.
- Security/crypto engine (DES/3DES/AES) for hardware-accelerated encryption.
- DMA/EDMA engine for high-throughput data movement.
- Real-time clock and watchdog with extensive timing resources.
- Debug/trace: JTAG and on-chip trace capabilities.
- Packaging: industrial temperature range (-40 to 85 C) in a lead-free VVALFB package.
Typical用途: telecom/industrial routers, switches, and other networked embedded applications.

Package

MPC8347VVALFB uses an LFBGA package (Lead-Free Fine-Pitch Ball Grid Array).

Pinout

Pin count: 784 pins (FBGA package).
Function: Freescale/NXP MPC8347VVALFB is a PowerQUICC III network processor/SoC. It integrates a PowerPC-based core with multiple high-speed interfaces (e.g., Ethernet MACs, PCI-X/PCIe, memory controllers and other I/O) for embedded networking applications.

Manufacturer

- Manufacturer: Freescale Semiconductor (now part of NXP Semiconductors).
- Company type: A semiconductor company that designs and manufactures embedded processors, microcontrollers, and related silicon for automotive, networking, industrial, and consumer applications.

Application

- Edge routers and switches
- Gateway platforms (CPE, DSLAM/access equipment)
- VPN, firewall, and IDS/IPS appliances
- Carrier-grade infrastructure (BRAS/MPLS, aggregation)
- Industrial and IoT edge gateways requiring robust packet processing, QoS, and security

Versand

VersandmethodenWir

bieten Sie globale Versanddienstleistungen durch DHL, FedEx, TNT, UPS oder einen anderen Spediteur Ihrer Wahl.


Versandgebührenreferenz (DHL/FedEx):

DHL: Versandkosten reichen von $25-$45 (0.5kg), mit einer geschätzten Lieferzeit von 2-5 Werktagen.

von FedEx: Versandkosten reichen von $25-$40 (0.5kg), mit einer geschätzten Lieferzeit von 3-7 Werktagen.

UPS: Versandkosten reichen von $25-$45 (0.5kg), mit einer geschätzten Lieferzeit von 3-7 Werktagen.

TNT: Versandkosten reichen von $25-$65 (0.5kg), mit einer geschätzten Lieferzeit von 3-7 Werktagen.

EMS: Versandkosten reichen von $30-$50 (0.5kg), mit einer geschätzten Lieferzeit von 7-15 Werktagen.

Registrierte Luftpost: Versandkosten sind $ 2- $ 4 (0,1 kg), mit einer geschätzten Lieferzeit von 5-20 Werktagen.

Zahlungen

Payment Methods

Die Zahlungsfrist ist 100% Prepaid.

Derzeit akzeptieren wir nur die folgenden Zahlungsmethoden:

1. PayPal

2. Kredit- / Debitkarte

3. Überweisung

Ähnliche