MPU-9150

Bilder sind nur zur Referenz

MPU-9150

IMU ACCEL/GYRO/MAG I2C 24LGA

  • Hersteller
  • Fr. Teil #MPU-9150
  • Paket
  • Datenblatt
  • Auf Lager8847

100% Original und Neu

24 Stunden bereit zum Versand

365 Tage Garantie

RFQ & Erhalten Sie mehr Rabatte

Spezifikationen

Series MotionTracking™
Part Status Obsolete
Sensor Type Accelerometer, Gyroscope, Magnetometer, 9 Axis
Output Type I2C
Operating Temperature -40°C ~ 85°C
Package 24-TFLGA Module
Supplier Device Package 24-LGA (4x4)
Mounting Type Surface Mount
Packaging Tape & Reel (TR)

Übersicht

Description

The MPU-9150 is a 9-axis MEMS inertial measurement unit (IMU) from InvenSense. It combines a 3-axis accelerometer, a 3-axis gyroscope, and a 3-axis magnetometer, plus an on‑chip Digital Motion Processor (DMP) for sensor fusion. It can output raw data for all axes and fused orientation data (quaternions or Euler angles), and supports features like a FIFO buffer and data-ready interrupts. Communication is over I2C (and SPI on some variants), and it is designed for low power, compact packages. Typical uses include motion tracking and stabilization in drones, robotics, wearables, and AR/VR. Integration usually requires magnetometer and sensor calibration, configurable ranges and data rates, and availability of libraries and example code for common microcontrollers.

Features

Here are the main features of the MPU-9150:
- 9-axis MEMS sensor: 3-axis accelerometer, 3-axis gyroscope, and 3-axis magnetometer (built-in compass).
- On-chip Digital Motion Processor (DMP) for sensor fusion: outputs quaternion/orientation (yaw/pitch/roll), gravity vector, linear acceleration, and supports gesture/tap/tilt detection.
- FIFO buffer and interrupt interface for efficient data handling.
- I2C interface (up to 400 kHz); optional I2C master to talk to the magnetometer.
- Lightweight, single-chip solution with low power modes.
- 16-bit data resolution for all sensors; configurable full-scale ranges (accel, gyro; mag).
- Wide operating voltage: typically 2.4–3.6 V; operating temperature range −40 to +85 °C.
- Compact package (small QFN form factor) suitable for mobile/embedded applications.

Package

24-pin LGA (leadless) package, about 4×4 mm.

Pinout

- Pin count: 24 pins (24‑lead LGA/QFN package, typical 3×3 mm footprint).
- Primary functions: 9-axis inertial sensor (3‑axis gyro + 3‑axis accelerometer + 3‑axis magnetometer via onboard AK8975), on‑chip DMP for sensor fusion, auxiliary I2C master to read the magnetometer.
- Typical pin roles (summary): power (VDD/VLOGIC/VIO), ground (GND), primary bus (I2C: SDA, SCL; or SPI: SCLK, MOSI, MISO, CS), auxiliary I2C lines for external/magnetometer (XDA/XCL), interrupt (INT), FSYNC (frame sync), AD0/SDO (I2C address or SPI data out select), and several NC/ground/package thermal pads.

Manufacturer

Manufacturer: InvenSense. It is a fabless semiconductor company that designs MEMS motion sensors (accelerometers, gyroscopes, magnetometers) for consumer electronics; it’s now a subsidiary of TDK.

Application

MPU-9150 applications include: smartphone/tablet motion sensing, drone/UAV flight stabilization and navigation, robotics orientation and IMU fusion, VR/AR head and controller tracking, wearables for activity tracking and gesture recognition, gaming motion controllers, automotive inertial navigation and stability control, camera gimbals and image stabilization, and IoT motion monitoring.

Equivalent

Equivalent 9-DOF IMUs to MPU-9150 include:
- MPU-9250 (direct InvenSense successor; same interface)
- ICM-20948 (InvenSense/TDK; newer 9-DOF)
- ST LSM9DS1 (9-DOF from STMicroelectronics)
- Bosch BNO055 (9-DOF with onboard fusion/orientation engine)
These are common drop-ins for accelerometer, gyroscope, and magnetometer in 9-axis applications.

Versand

VersandmethodenWir

bieten Sie globale Versanddienstleistungen durch DHL, FedEx, TNT, UPS oder einen anderen Spediteur Ihrer Wahl.


Versandgebührenreferenz (DHL/FedEx):

DHL: Versandkosten reichen von $25-$45 (0.5kg), mit einer geschätzten Lieferzeit von 2-5 Werktagen.

von FedEx: Versandkosten reichen von $25-$40 (0.5kg), mit einer geschätzten Lieferzeit von 3-7 Werktagen.

UPS: Versandkosten reichen von $25-$45 (0.5kg), mit einer geschätzten Lieferzeit von 3-7 Werktagen.

TNT: Versandkosten reichen von $25-$65 (0.5kg), mit einer geschätzten Lieferzeit von 3-7 Werktagen.

EMS: Versandkosten reichen von $30-$50 (0.5kg), mit einer geschätzten Lieferzeit von 7-15 Werktagen.

Registrierte Luftpost: Versandkosten sind $ 2- $ 4 (0,1 kg), mit einer geschätzten Lieferzeit von 5-20 Werktagen.

Zahlungen

Payment Methods

Die Zahlungsfrist ist 100% Prepaid.

Derzeit akzeptieren wir nur die folgenden Zahlungsmethoden:

1. PayPal

2. Kredit- / Debitkarte

3. Überweisung

Ähnliche