MX25L12833FM2R-10G

Bilder sind nur zur Referenz

MX25L12833FM2R-10G

IC FLASH 128MBIT SPI/QUAD 8SOP A

  • Hersteller
  • Fr. Teil #MX25L12833FM2R-10G
  • Paket
  • Datenblatt
  • Auf Lager6178

100% Original und Neu

24 Stunden bereit zum Versand

365 Tage Garantie

RFQ & Erhalten Sie mehr Rabatte

Spezifikationen

Series MXSMIO™
Part Status Active
Base Product Number MX25L12833
Memory Type Non-Volatile
Memory Format FLASH
Technology FLASH - NOR (SLC)
Memory Size 128Mbit
Memory Organization 32M x 4, 64M x 2, 128M x 1
Memory Interface SPI - Quad I/O, QPI
Clock Frequency 104 MHz
Voltage - Supply 2.7V ~ 3.6V
Operating Temperature -40°C ~ 105°C (TA)
Mounting Type Surface Mount
Package 8-SOIC (0.209", 5.30mm Width)
Supplier Device Package 8-SOP
Packaging Tube

Übersicht

Description

MX25L12833FM2R-10G is Macronix’s 128-Mbit (16 MB) serial NOR flash memory in an 8-pin M2R package. It is designed to store firmware and data in embedded systems and is SPI-compatible with optional dual/Quad I/O modes for higher throughput.
Key points:
- Capacity and interface: 128 Mbit; SPI with dual/quad I/O options; 24-bit addressing.
- Erase/Program: supports sector/block erases and full-chip erase; page-program operation.
- Speed and voltage: operates at 2.7–3.6 V; clock up to about 100+ MHz (mode dependent).
- Features: write enable/disable, status register, block protection, deep power-down, resume after erase/program.
- Environment: typical commercial range (-40°C to 85°C; industrial variants available).
- Applications: firmware boot code, code and data storage in microcontrollers and embedded systems.
Note: exact block sizes, endurance, and temperature grades should be verified in the latest datasheet for your specific lot.

Features

Key features of MX25L12833FM2R-10G:
- Capacity: 128 Mbit (16 Mbyte) serial NOR flash
- Interface: SPI with Dual/Quad I/O and QPI support
- Supply: 2.7–3.6 V operation (3V family)
- Read/Access: high-speed fast read; supports standard and wide read modes
- Page/Erase: 256-byte page program; erase options include 4 KB sectors, 32 KB and 64 KB blocks, plus chip erase
- Endurance/Data Retention: typical 100k P/E cycles per byte; data retention ~10–20 years (industrial grades)
- Power/Power-Down: low power modes with deep power-down support
- Security/Protection: sector/block protection with status and lock-down features; WP# hardware protection
- Suspend/Resume: program/erase suspend and resume capability
- Temperature Grade: industrial range (-40°C to 85°C) for rugged operation
- Packaging: 8-pin package (US8/SOP8 style) suitable for space-constrained designs
Optional: specific timing (read speed) and exact voltage/temperature specs vary by revision; consult datasheet for details.

Package

It uses an 8-pin SOP (SOIC) package.

Pinout

- Pin count: 8 pins (8-pin package, e.g., SO8)
- Function: 128-Mbit serial NOR flash memory (MX25L family) with SPI interface for firmware/data storage. Pins typically include CS, CLK, DI (MOSI), DO (MISO), WP#, HOLD#, VCC, GND.

Manufacturer

Manufacturer: Macronix International Corp., Ltd. (Taiwan).
What kind of company: A Taiwanese semiconductor company that designs and manufactures non-volatile memory products (NOR/NAND flash, ROM) and related memory solutions for consumer, automotive, and industrial applications; publicly traded and operates as a global IC memory supplier.

Application

- Firmware storage and execution for MCUs/SoCs (boot memory, code flash)
- Firmware updates and recovery in embedded systems (including OTA)
- Automotive and industrial control units (boot code, configuration, logging)
- Networking equipment (routers, switches, gateways) for code and data storage
- Consumer electronics and IoT devices needing high-density serial NOR flash
- Secure storage of configuration data and small logs/high-reliability storage needs

Equivalent

Common equivalents (128 Mbit SPI NOR Flash, 3.3V, ~104 MHz):
- Winbond W25Q128FV
- GigaDevice GD25Q128C (GD25Q128CSIG)
- ISSI IS25LP128D (IS25LP128M)
- Cypress/Spansion S25FL128S (S25FL128P)
Note: verify timing, voltage range, package, and pinout for exact cross-compatibility.

Versand

VersandmethodenWir

bieten Sie globale Versanddienstleistungen durch DHL, FedEx, TNT, UPS oder einen anderen Spediteur Ihrer Wahl.


Versandgebührenreferenz (DHL/FedEx):

DHL: Versandkosten reichen von $25-$45 (0.5kg), mit einer geschätzten Lieferzeit von 2-5 Werktagen.

von FedEx: Versandkosten reichen von $25-$40 (0.5kg), mit einer geschätzten Lieferzeit von 3-7 Werktagen.

UPS: Versandkosten reichen von $25-$45 (0.5kg), mit einer geschätzten Lieferzeit von 3-7 Werktagen.

TNT: Versandkosten reichen von $25-$65 (0.5kg), mit einer geschätzten Lieferzeit von 3-7 Werktagen.

EMS: Versandkosten reichen von $30-$50 (0.5kg), mit einer geschätzten Lieferzeit von 7-15 Werktagen.

Registrierte Luftpost: Versandkosten sind $ 2- $ 4 (0,1 kg), mit einer geschätzten Lieferzeit von 5-20 Werktagen.

Zahlungen

Payment Methods

Die Zahlungsfrist ist 100% Prepaid.

Derzeit akzeptieren wir nur die folgenden Zahlungsmethoden:

1. PayPal

2. Kredit- / Debitkarte

3. Überweisung