PCA9548ADW

Bilder sind nur zur Referenz

PCA9548ADW

IC INTERFACE SPECIALIZED 24SOIC

100% Original und Neu

24 Stunden bereit zum Versand

365 Tage Garantie

RFQ & Erhalten Sie mehr Rabatte

Spezifikationen

Supplier Rochester Electronics, LLC,Texas Instruments
Package Bulk,Tube
ProductStatus Active
Applications Translating Switch
Interface I²C, SMBus
Voltage-Supply 2.3V ~ 5.5V
Package/Case 24-SOIC (0.295, 7.50mm Width)
SupplierDevicePackage 24-SOIC

Übersicht

Description

PCA9548ADW is NXP’s PCA9548A 8-channel I2C switch/multiplexer in the DW package. It lets one I2C master drive up to eight independent downstream I2C buses, isolating each bus to avoid address conflicts or noise.
Key points
- Upstream: connects to the master I2C bus; downstream: eight separate buses (channels 0–7).
- Address: base 0x70 and A0–A2 pins select 0x70–0x77.
- Operation: send a single 8-bit control byte to enable channels (bit N = 1 enables channel N). Multiple channels may be active simultaneously.
- Use: after selecting channels, you can access devices on those channels as if they were directly on the bus.
- Electrical: Vcc = 2.3–5.5 V; I2C speeds up to 400 kHz (fast-mode).
- Notes: no data buffer; switching channels is done by writing a new control byte. Cascading multiple devices is possible for more channels.
Common use: expand I2C with multiple devices sharing addresses, such as sensors or EEPROMs, without changing their hardware addresses.

Features

PCA9548ADW is an 8-channel I2C bus switch (I2C multiplexer) from NXP.
Key features:
- 8 downstream I2C buses, switchable independently from a single master.
- Isolates disabled channels to prevent cross-talk and address conflicts on downstream devices.
- Control via one 8-bit register; each bit enables one channel (0–7). Base I2C address is 0x70 with A0–A2 selectables (0x70–0x77).
- Supports standard-mode and fast-mode I2C (up to 400 kHz).
- Single-supply operation: Vcc typically 1.65–5.5 V (all channels share the same supply; downstream devices must be compatible).
- No level-shifting between master and downstream buses; ensure compatible logic levels.
- Useful for coexisting devices with identical addresses and for expanding I2C topology without conflicts.
- Available in compact DW package variants.

Package

The PCA9548ADW is supplied in a 20-pin TSSOP package (TSSOP-20, NXP package code "DW").

Pinout

PCA9548ADW is supplied in a 24-pin DW (SOIC/TSSOP style) package. Functionally it is an 8‑channel I2C switch with these pins:
- VCC and GND: power supply.
- SDA and SCL: upstream (master-side) I2C data and clock.
- SDA0–SDA7 and SCL0–SCL7: eight downstream (channel) data/clock pairs (16 pins).
- A0, A1, A2: hardware I2C address select inputs.
- RESET: device reset input.
In short: 24 pins total, providing power, one master I2C port, eight bidirectional I2C channel pairs, three address-select pins, and a reset pin.

Manufacturer

The PCA9548ADW is manufactured by NXP Semiconductors (originally Philips Semiconductors). NXP is a global semiconductor company that designs and manufactures mixed-signal and standard integrated circuits for automotive, industrial, IoT, mobile and communications applications.

Application

PCA9548ADW is an 8-channel I2C switch/multiplexer. Applications: expand the I2C bus while avoiding address conflicts by routing devices to separate channels; isolate noisy/high-capacitance peripherals to improve bus performance; enable selective power-down or hot-swapping of sections; organize multi-sensor arrays (temp/humidity/accel/MEMS, ADCs), EEPROMs, displays, and other I2C peripherals in embedded systems, wearables, automotive, and industrial electronics.

Equivalent

Direct drop‑in equivalents: Texas Instruments TCA9548A. Other NXP PCA9548A family variants (different packages/markings) also match PCA9548ADW. Analog alternatives (not exact I2C‑address/pin compatible) include Analog Devices ADG728 / ADG704 8‑channel muxes. For exact replacement confirm package, power and I2C address specs.

Versand

VersandmethodenWir

bieten Sie globale Versanddienstleistungen durch DHL, FedEx, TNT, UPS oder einen anderen Spediteur Ihrer Wahl.


Versandgebührenreferenz (DHL/FedEx):

DHL: Versandkosten reichen von $25-$45 (0.5kg), mit einer geschätzten Lieferzeit von 2-5 Werktagen.

von FedEx: Versandkosten reichen von $25-$40 (0.5kg), mit einer geschätzten Lieferzeit von 3-7 Werktagen.

UPS: Versandkosten reichen von $25-$45 (0.5kg), mit einer geschätzten Lieferzeit von 3-7 Werktagen.

TNT: Versandkosten reichen von $25-$65 (0.5kg), mit einer geschätzten Lieferzeit von 3-7 Werktagen.

EMS: Versandkosten reichen von $30-$50 (0.5kg), mit einer geschätzten Lieferzeit von 7-15 Werktagen.

Registrierte Luftpost: Versandkosten sind $ 2- $ 4 (0,1 kg), mit einer geschätzten Lieferzeit von 5-20 Werktagen.

Zahlungen

Payment Methods

Die Zahlungsfrist ist 100% Prepaid.

Derzeit akzeptieren wir nur die folgenden Zahlungsmethoden:

1. PayPal

2. Kredit- / Debitkarte

3. Überweisung

Ähnliche