SC16IS760IPW

The SC16IS760IPW is a single-channel I2C-bus/SPI-bus universal asynchronous receiver-transmitter (UART) with a 64-byte FIFO. It serves as a bridge in communication systems, facilitating the transfer of data between a microcontroller and a UART peripheral through standard I2C or SPI interfaces. This device is particularly useful in applications requiring serial communication, adding UART capability to microcontrollers that may not have native UART support.
Key features include support for standard baud rates up to 5 Mbps, hardware and software flow control, and infrared (IrDA) data handling. The SC16IS760IPW can be configured through its register set, providing control over parameters such as baud rate, data format, and flow control. It also includes a DMA mode for high-speed data transfer and an interrupt pin to alert the host processor of data transmission or reception events.
The device's compact design, low power consumption, and wide temperature range make it suitable for embedded systems, consumer electronics, and industrial applications, where efficient data communication is critical.

The SC16IS760IPW is a UART with an I2C-bus/SPI interface, and it comes in a TSSOP (Thin Shrink Small Outline Package) with 28 pins. This package type is compact and suitable for surface mounting on circuit boards, making it ideal for space-constrained applications.

The SC16IS760IPW is a single-channel I2C-bus/SPI bus UART with a pin count of 28. Its primary function is to serve as a bridge between a microcontroller and a serial device, translating data between I2C/SPI interfaces and UART serial communication protocols.
Key functionalities include:
1. UART Communication: It supports standard UART communication with features like programmable baud rate generator, fractional baud rate support, and a 64-byte FIFO for transmit and receive.
2. I2C/SPI Interface: The chip can be connected to a microcontroller via either I2C or SPI interface, offering flexibility in terms of communication protocol.
3. GPIOs: It includes additional General Purpose Input/Output (GPIO) pins, which can be used for various user-defined functions.
4. Interrupts: The device provides interrupt capabilities to alert the host processor of buffered data ready for processing, which can be configured for various events like data received or transmit holding register empty.
The SC16IS760IPW is often used in applications requiring reliable serial communication, such as industrial automation, point-of-sale systems, and telecommunications.

The SC16IS760IPW is manufactured by NXP Semiconductors. NXP is a global semiconductor company headquartered in Eindhoven, Netherlands. It is known for developing solutions in areas such as automotive, industrial, mobile, and communication infrastructure. NXP is a leader in innovation for secure connectivity and infrastructure, providing a wide range of semiconductor products including microcontrollers, processors, and sensors.

The SC16IS760IPW is a versatile I2C/SPI to UART bridge, commonly used in applications requiring serial communication protocol conversions. It is ideal for interfacing microcontrollers with RS-232 or RS-485 devices, making it suitable for industrial automation, point-of-sale systems, and telecommunications. Additionally, it can be used in embedded systems to add serial ports, connect GPS modules, or integrate legacy serial devices with modern processors. Its compact design and low power consumption make it well-suited for portable and battery-operated devices.

The SC16IS760IPW is a UART (Universal Asynchronous Receiver-Transmitter) with I2C/SPI interface. Equivalent products include the NXP SC16IS750, Maxim Integrated MAX3107, Texas Instruments TL16C750, and Exar XR16M770. These chips offer similar functionalities but may vary in specific features and performance characteristics, so checking the datasheets for compatibility with your application is recommended.