SN74LVCR2245APW

Bilder sind nur zur Referenz

SN74LVCR2245APW

IC TXRX NON-INVERT 3.6V 20TSSOP

100% Original und Neu

24 Stunden bereit zum Versand

365 Tage Garantie

RFQ & Erhalten Sie mehr Rabatte

Spezifikationen

Supplier Rochester Electronics, LLC,Texas Instruments
Package Bulk,Tube
Series 74LVCR
ProductStatus Active
LogicType Transceiver, Non-Inverting
NumberofElements 1
NumberofBitsperElement 8
OutputType 3-State
Current-OutputHighLow 12mA, 12mA
Voltage-Supply 1.65V ~ 3.6V
OperatingTemperature -40°C ~ 125°C (TA)
MountingType Surface Mount
Package/Case 20-TSSOP (0.173, 4.40mm Width)

Übersicht

Description

SN74LVCR2245APW is TI’s low‑voltage bidirectional buffer/line driver in the SN74LVCR family. It provides multiple tri‑state buffers arranged as bidirectional bus transceivers with a direction control (DIR) and a global output enable (OE). The device is designed to buffer data between devices on a shared bus (e.g., microprocessors, memory, peripherals), isolating loads and allowing controlled data flow in either direction.
Key points:
- Low‑voltage operation (LV family; typically 1.65V–3.6V)
- Bidirectional data transfer with DIR and OE control
- Tri‑state outputs suitable for bus interfacing
- Available in PW/APW package variants (TI’s package codes)
Typical uses include buffering high‑density data/address buses, or protecting and isolating digital buses between devices in a system.
Note: exact bit width, drive strength, input/output characteristics, and voltage ranges vary by variant. For precise specifications, pinout, and timing, consult the TI SN74LVCR2245APW datasheet.

Features

Here are typical features of the SN74LVCR2245APW:
- 20-bit bidirectional bus transceiver with 3-state outputs
- Two ports labeled A and B for bidirectional data flow
- Direction control input (DIR): selects A→B or B→A data direction
- Output-enable input (OE): disables outputs to high-impedance state
- 3-state outputs on both sides for bus sharing
- Bus-hold on data inputs to prevent floating when not driven
- Low-voltage CMOS-compatible operation (typical LV range) with TTL/CMOS input thresholds
- ESD protection and robust operation per TI standards
- Available in PW package (surface-mount)
Applications include interfacing between different voltage domains, microcontroller-to-memory buses, and other shared-bus systems. For exact supply voltage range, speed, and packaging options, consult the datasheet.

Package

20-pin TSSOP package (PW).

Pinout

Pin count: 20 pins (TSSOP-20 package, PW).
Function: Dual 4-bit bidirectional bus transceiver with 3-state outputs (8-bit total). Allows data transfer between two 4-bit buses; direction controlled by a DIR input and output enable controlled by OE (one enable for the transceiver). Suitable for buffering/interfacing between different bus voltages in low-voltage logic.

Manufacturer

Manufacturer: Texas Instruments (TI).
Company type: American multinational semiconductor company that designs and manufactures a broad range of integrated circuits, analog and digital products, sensors, and related components. It is one of the world’s largest semiconductor makers, headquartered in Dallas, Texas.

Application

SN74LVCR2245APW is a 20-bit, dual 10-bit buffer/driver with tri-state outputs. Typical applications:
- Level shifting and buffering of wide data/address buses between logic families (e.g., 1.8–3.3 V to 5 V)
- I/O expansion and backplane/bus interconnections between microprocessors/FPGA and memories or peripherals
- High-speed, low-power bus routing in portable/consumer electronics
- Bus isolation/sharing and power-down bus control for bus-enabled systems

Equivalent

To give accurate equivalents, please specify target packaging and vendors. SN74LVCR2245APW is TI’s low-voltage octal buffer/driver (3-state). Do you want cross-references for PW/TSSOP-20 only, or also other packages and vendors (e.g., NXP, ON Semiconductor, Renesas, etc.)? If yes, I’ll list exact part numbers.

Versand

VersandmethodenWir

bieten Sie globale Versanddienstleistungen durch DHL, FedEx, TNT, UPS oder einen anderen Spediteur Ihrer Wahl.


Versandgebührenreferenz (DHL/FedEx):

DHL: Versandkosten reichen von $25-$45 (0.5kg), mit einer geschätzten Lieferzeit von 2-5 Werktagen.

von FedEx: Versandkosten reichen von $25-$40 (0.5kg), mit einer geschätzten Lieferzeit von 3-7 Werktagen.

UPS: Versandkosten reichen von $25-$45 (0.5kg), mit einer geschätzten Lieferzeit von 3-7 Werktagen.

TNT: Versandkosten reichen von $25-$65 (0.5kg), mit einer geschätzten Lieferzeit von 3-7 Werktagen.

EMS: Versandkosten reichen von $30-$50 (0.5kg), mit einer geschätzten Lieferzeit von 7-15 Werktagen.

Registrierte Luftpost: Versandkosten sind $ 2- $ 4 (0,1 kg), mit einer geschätzten Lieferzeit von 5-20 Werktagen.

Zahlungen

Payment Methods

Die Zahlungsfrist ist 100% Prepaid.

Derzeit akzeptieren wir nur die folgenden Zahlungsmethoden:

1. PayPal

2. Kredit- / Debitkarte

3. Überweisung