STD47N10F7AG

Bilder sind nur zur Referenz

STD47N10F7AG

MOSFET N-CH 100V 45A DPAK

100% Original und Neu

24 Stunden bereit zum Versand

365 Tage Garantie

RFQ & Erhalten Sie mehr Rabatte

Spezifikationen

Supplier STMicroelectronics
Package Tape & Reel (TR),Cut Tape (CT)
Series Automotive, AEC-Q101, STripFET™ F7
ProductStatus Active
FETType N-Channel
Technology MOSFET (Metal Oxide)
DraintoSourceVoltage(Vdss) 100 V
Current-ContinuousDrain(Id)@25°C 45A (Tc)
DriveVoltage(MaxRdsOnMinRdsOn) 10V
RdsOn(Max)@IdVgs 18mOhm @ 22.5A, 10V
Vgs(th)(Max)@Id 4.5V @ 250µA
GateCharge(Qg)(Max)@Vgs 25 nC @ 10 V
Vgs(Max) ±10V
InputCapacitance(Ciss)(Max)@Vds 1640 pF @ 50 V
PowerDissipation(Max) 60W (Tc)
OperatingTemperature -55°C ~ 175°C (TJ)
MountingType Surface Mount
SupplierDevicePackage DPAK

Übersicht

Description

STD47N10F7AG is an N-channel power MOSFET from STMicroelectronics (part of the STD47N10F7 family). It’s designed as a high‑voltage, high‑current switching device for power electronics.
Key points
- Type: N-channel enhancement MOSFET
- Technology: trench/fast-switching power MOSFET, suitable for rugged switching applications
- Packaging: commonly available in surface‑mount forms such as DPAK (TO‑252) or D²PAK (TO‑263)
- Applications: DC–DC converters, motor drivers, automotive power management, switching regulators
How to use
- Connect source to ground (low side) or follow the intended topology; drain goes to the load.
- Gate driven by a suitable gate voltage per the datasheet; use gate resistors and protection as needed.
- Provide adequate heat sinking; observe VDS, ID, and thermal limits.
Note
- Exact electrical specs (VDS, ID, RDS(on), Qg, switching times) vary by variant. Check the official STMicroelectronics datasheet for precise values. If you want, I can outline the pinout and a sample circuit once you confirm the package.

Features

STD47N10F7AG is an STMicroelectronics N-channel MOSFET. Key features include:
- VDS = 100 V; ID (continuous) ~47 A
- RDS(on) ≈ 9–12 mΩ (typ) at VGS = 10 V (max ~15 mΩ)
- VGS(th) typically 2–4 V
- Rugged switching device with avalanche energy rating and short-circuit ruggedness
- Fast switching suitable for switching power supplies and motor drives
- Low gate drive losses with moderate gate charge
- Pb-free/RoHS-compliant, designed for surface-mount power applications
- Wide operating temperature range (-55°C to 150°C)
Note: Exact values depend on lot and conditions; refer to the datasheet for precise parameters and recommended operating conditions.

Package

DPAK (TO-252) surface-mount package.

Pinout

Pin count: 3 main pins (Gate, Drain, Source). The metal/tab is typically connected to the Drain (so count as an additional thermal/PCB mounting connection).
Function: an N‑channel enhancement‑mode power MOSFET used for switching and power control (load switching, DC–DC converters, motor drivers, etc.).

Manufacturer

The STD47N10F7AG is manufactured by STMicroelectronics. STMicroelectronics is a multinational semiconductor company that designs, develops and manufactures integrated circuits and discrete semiconductor devices (including power MOSFETs, analog, microcontrollers and sensors) for automotive, industrial, consumer and communications markets.

Application

STD47N10F7AG is a high‑power N‑channel MOSFET (100 V class). Typical applications:
- Switch‑mode power supplies and DC‑DC converters
- Motor control (BLDC/DC motors) via half/full bridges
- Automotive power electronics (DC‑DC, battery management, load switching)
- Solar/renewables inverters and interfaces
- Uninterruptible power supplies and general high‑current load switching

Equivalent

There’s no single drop-in part number; equivalents are other N‑channel power MOSFETs with the same VDS (≈100 V), continuous ID (≈47 A), similar RDS(on) and the same package. Examples to consider (verify datasheets): STW47N10, Vishay SiH47N10-family, Infineon/IPP 47N10 variants. Always confirm VDS, RDS(on), ID, thermal resistance and pinout before substitution.

Versand

VersandmethodenWir

bieten Sie globale Versanddienstleistungen durch DHL, FedEx, TNT, UPS oder einen anderen Spediteur Ihrer Wahl.


Versandgebührenreferenz (DHL/FedEx):

DHL: Versandkosten reichen von $25-$45 (0.5kg), mit einer geschätzten Lieferzeit von 2-5 Werktagen.

von FedEx: Versandkosten reichen von $25-$40 (0.5kg), mit einer geschätzten Lieferzeit von 3-7 Werktagen.

UPS: Versandkosten reichen von $25-$45 (0.5kg), mit einer geschätzten Lieferzeit von 3-7 Werktagen.

TNT: Versandkosten reichen von $25-$65 (0.5kg), mit einer geschätzten Lieferzeit von 3-7 Werktagen.

EMS: Versandkosten reichen von $30-$50 (0.5kg), mit einer geschätzten Lieferzeit von 7-15 Werktagen.

Registrierte Luftpost: Versandkosten sind $ 2- $ 4 (0,1 kg), mit einer geschätzten Lieferzeit von 5-20 Werktagen.

Zahlungen

Payment Methods

Die Zahlungsfrist ist 100% Prepaid.

Derzeit akzeptieren wir nur die folgenden Zahlungsmethoden:

1. PayPal

2. Kredit- / Debitkarte

3. Überweisung

Ähnliche