STM32F479NIH6

Bilder sind nur zur Referenz

STM32F479NIH6

IC MCU 32BIT 2MB FLASH 216TFBGA

  • Hersteller
  • Fr. Teil #STM32F479NIH6
  • Paket
  • Datenblatt
  • Auf Lager5763

100% Original und Neu

24 Stunden bereit zum Versand

365 Tage Garantie

RFQ & Erhalten Sie mehr Rabatte

Spezifikationen

Series STM32F4
Part Status Active
DigiKey Programmable Not Verified
Core Processor ARM® Cortex®-M4
Core Size 32-Bit Single-Core
Speed 180MHz
Connectivity CANbus, EBI/EMI, Ethernet, I2C, IrDA, LINbus, SAI, SDIO, SPI, UART/USART, USB, USB OTG
Peripherals Brown-out Detect/Reset, DMA, I2S, LCD, POR, PWM, WDT
Number of I/O 161
Program Memory Size 2MB (2M x 8)
Program Memory Type FLASH
RAM Size 384K x 8
Voltage - Supply (Vcc/Vdd) 1.7V ~ 3.6V
Data Converters A/D 24x12b; D/A 2x12b
Oscillator Type Internal
Operating Temperature -40°C ~ 85°C (TA)
Mounting Type Surface Mount
Supplier Device Package 216-TFBGA (13x13)
Package / Case 216-TFBGA
Base Product Number STM32F479

Übersicht

Description

STM32F479NIH6 is a high‑performance MCU from STMicroelectronics’ STM32F4 family. It uses a 32‑bit ARM Cortex‑M4F core with hardware FPU and DSP instructions, running up to 180 MHz. The NIH6 suffix indicates a 100‑pin LQFP package (industrial temp range; verify exact packaging in the datasheet).
Key features (typical for this family): rich GPIO and timers, multiple 12‑bit ADCs and DAC, USB OTG (FS), USART/UART, SPI, I2C, SDIO, and memory interfaces for external RAM/Flash; plus an LCD‑TFT graphics controller in many variants. On‑chip memory sizes (Flash/RAM) vary by part, suitable for mid‑range embedded applications.
Development is supported by ST’s ecosystem: STM32CubeMX, HAL/LL drivers, and ST‑Link for debugging. Common use cases include motor control, audio, graphics displays, data acquisition, and general-purpose high‑performance embedded systems. For exact memory sizes, peripherals, and the package, consult the STM32F479NIH6 datasheet and reference manuals.

Features

STM32F479NIH6 features (highlights)
- Core: 32-bit ARM Cortex-M4F with FPU and DSP instructions
- Speed: up to 180 MHz
- Memory: up to 2 MB Flash; up to 256 KB SRAM
- USB: USB OTG Full-Speed
- Connectivity: CAN 2.0B, SDIO, SPI, I2C, USART/UART (plus LPUART)
- Analog: 12-bit ADC (multi-channel), 12-bit DAC
- Graphics/Display: LTDC (LCD-TFT) controller and DMA2D for graphics
- Memory interface: Flexible Memory Controller (external memory support)
- Data/CRC: hardware CRC engine
- Timers: multiple general-purpose and advanced-TIMs (TIM1 involved)
- DMA: dedicated DMA controller with multiple streams/channels
- Power/voltage: 1.7–3.6 V supply, various low-power modes
- Package: LQFP-100 (NIH6) Pin count and footprint
- Temp range: industrial-grade operating range (-40 to 85 °C)
Note: exact RAM/Flash sizes and peripheral counts can vary by exact device variant; refer to the datasheet for precise numbers.

Package

LQFP-100 package (100-pin LQFP, 14×14 mm).

Pinout

- Pin count: 144 pins (LQFP-144 package).
- Function: STM32F479NIH6 is a 32-bit ARM Cortex-M4 microcontroller (STM32F4 family) for embedded applications, with integrated peripherals such as USB OTG FS, CAN, multiple SPI/I2C/UART, ADC/DAC, timers, and LCD controller.

Manufacturer

- Manufacturer: STMicroelectronics (ST)
- Company type: A multinational semiconductor company (electronics chip designer and manufacturer) headquartered in Geneva, Switzerland; known for microcontrollers (including STM32), sensors, analog and power ICs.

Application

Common application areas for STM32F479NIH6 include:
- Industrial automation and motor control
- HMI and TFT/LCD display panels
- Audio, DSP, and multimedia applications
- USB peripherals, data logging, and connectivity
- Portable medical and sensing equipment
- Robotics and embedded control systems
- Smart consumer devices and home automation with USB/SDIO
- High-performance embedded applications needing DSP, timers, ADC/DAC, and USB features

Equivalent

Closest equivalents (same Cortex‑M4 core and similar peripherals) are within ST’s STM32F4 family:
- STM32F429/439 series
- STM32F469/479 series
- STM32F407/417 series (older but widely drop‑in in many designs)
Non‑ST options with similar capabilities: NXP LPC4088/LPC43xx, Microchip SAM4S.
Note: exact pinout, memory, and peripheral counts vary; choose based on package, flash/RAM, and required peripherals.

Versand

VersandmethodenWir

bieten Sie globale Versanddienstleistungen durch DHL, FedEx, TNT, UPS oder einen anderen Spediteur Ihrer Wahl.


Versandgebührenreferenz (DHL/FedEx):

DHL: Versandkosten reichen von $25-$45 (0.5kg), mit einer geschätzten Lieferzeit von 2-5 Werktagen.

von FedEx: Versandkosten reichen von $25-$40 (0.5kg), mit einer geschätzten Lieferzeit von 3-7 Werktagen.

UPS: Versandkosten reichen von $25-$45 (0.5kg), mit einer geschätzten Lieferzeit von 3-7 Werktagen.

TNT: Versandkosten reichen von $25-$65 (0.5kg), mit einer geschätzten Lieferzeit von 3-7 Werktagen.

EMS: Versandkosten reichen von $30-$50 (0.5kg), mit einer geschätzten Lieferzeit von 7-15 Werktagen.

Registrierte Luftpost: Versandkosten sind $ 2- $ 4 (0,1 kg), mit einer geschätzten Lieferzeit von 5-20 Werktagen.

Zahlungen

Payment Methods

Die Zahlungsfrist ist 100% Prepaid.

Derzeit akzeptieren wir nur die folgenden Zahlungsmethoden:

1. PayPal

2. Kredit- / Debitkarte

3. Überweisung

Ähnliche