W25Q64JWSSIQ

Bilder sind nur zur Referenz

W25Q64JWSSIQ

IC FLASH 64MBIT SPI/QUAD 8SOIC

100% Original und Neu

24 Stunden bereit zum Versand

365 Tage Garantie

RFQ & Erhalten Sie mehr Rabatte

Spezifikationen

Series SpiFlash®
Part Status Active
Base Product Number W25Q64
DigiKey Programmable Not Verified
Memory Type Non-Volatile
Memory Format FLASH
Technology FLASH - NOR
Memory Size 64Mbit
Memory Organization 8M x 8
Memory Interface SPI - Quad I/O
Clock Frequency 133 MHz
Write Cycle Time - Word, Page 3ms
Voltage - Supply 1.7V ~ 1.95V
Operating Temperature -40°C ~ 85°C (TA)
Mounting Type Surface Mount
Package 8-SOIC (0.209", 5.30mm Width)
Supplier Device Package 8-SOIC
Packaging Tube

Übersicht

Description

The W25Q64JWSSIQ is a 64 Mbit (8 MB) serial NOR Flash memory chip manufactured by Winbond. It utilizes the Quad SPI (Serial Peripheral Interface) protocol, allowing for high-speed data transfer and efficient operation in embedded systems. This chip operates with a supply voltage range of 2.7V to 3.6V and features a range of functionalities, including read, program, and erase capabilities.
The W25Q64JWSSIQ supports multiple modes of operation, including dual and quad I/O, which enhances performance by allowing multiple bits to be transferred simultaneously. It also includes features like deep power-down, protecting stored data during low power states, and supports the Uniform Sector architecture that allows for flexible memory management.
Common applications include industrial automation, consumer electronics, and automotive systems, where reliable non-volatile memory is essential for storing firmware, configuration data, and system parameters. The chip is available in various packages, making it suitable for a wide range of designs and applications.

Features

The W25Q64JWSSIQ is a 64Mb (8MB) serial NOR flash memory chip from Winbond, featuring a 3V power supply and a SPI (Serial Peripheral Interface) architecture. Key features include:
1. Density: 64Mb (8MB) with single, dual, and quad SPI support for high-speed data transfer.
2. Speed: Fast read speeds up to 104 MHz, allowing for quick access to stored data.
3. Endurance: Supports up to 100,000 program/erase cycles per sector, ensuring durability for frequent writes.
4. Data Retention: Maintains data integrity for 20 years at 85°C, making it reliable for long-term storage.
5. Package Options: Available in various packages, including 8-pin SOP, 16-pin SOIC, and 24-pin WSON for flexible integration.
6. Instructions: Offers a comprehensive set of commands for read, write, erase, and status operations.
7. Security Features: Includes features like Write Protection and a unique ID for secure applications.
This chip is widely used in consumer electronics, automotive, and industrial applications due to its reliability and performance.

Package

The W25Q64JWSSIQ is packaged in a SOP-8 (Small Outline Package) form factor, which is a surface-mount package commonly used for integrated circuits.

Pinout

The W25Q64JWSSIQ is a 64Mb serial NOR Flash memory chip manufactured by Winbond. It features a 16-pin SOIC (Small Outline Integrated Circuit) package. The key functions of each pin are as follows:
1. CS# (Chip Select): Active low chip select signal.
2. SO (Serial Output): Data output pin.
3. SI (Serial Input): Data input pin.
4. SCK (Serial Clock): Clock signal for data transmission.
5. WP# (Write Protect): Active low pin to protect data from being written.
6. HOLD#: Active low pin to pause communication without resetting the device.
7. VCC: Power supply pin (typically 2.7V to 3.6V).
8. GND: Ground pin.
9. NC: Not connected (reserved for future use).
The W25Q64JWSSIQ supports various features like Quad I/O and has a fast read speed, making it suitable for applications requiring non-volatile memory.

Manufacturer

The W25Q64JWSSIQ is manufactured by Winbond Electronics Corporation. Winbond is a semiconductor company based in Taiwan, specializing in the production of memory products, including NOR flash memory, DRAM, and various integrated circuits. Founded in 1987, Winbond focuses on developing advanced memory solutions for a wide range of applications, such as consumer electronics, automotive, and industrial devices. Their products are widely used in mobile devices, automotive systems, and IoT applications, reflecting the company's commitment to innovation and quality in the semiconductor industry.

Application

The W25Q64JWSSIQ is a 64Mb serial NOR flash memory chip commonly used in embedded systems for applications such as firmware storage, code execution, data logging, and configuration storage. It is ideal for consumer electronics, automotive systems, IoT devices, and industrial applications, providing fast read/write speeds and high endurance for reliable data retention.

Equivalent

The W25Q64JWSSIQ chip is a 64Mb serial NOR flash memory. Equivalent products include the Micron MT25QL640ABA, Winbond W25Q64FV, and Spansion S25FL064P. These chips also feature similar density, SPI interface, and memory organization, making them suitable alternatives for applications requiring 64Mb flash storage. Always verify specifications to ensure compatibility.

Versand

VersandmethodenWir

bieten Sie globale Versanddienstleistungen durch DHL, FedEx, TNT, UPS oder einen anderen Spediteur Ihrer Wahl.


Versandgebührenreferenz (DHL/FedEx):

DHL: Versandkosten reichen von $25-$45 (0.5kg), mit einer geschätzten Lieferzeit von 2-5 Werktagen.

von FedEx: Versandkosten reichen von $25-$40 (0.5kg), mit einer geschätzten Lieferzeit von 3-7 Werktagen.

UPS: Versandkosten reichen von $25-$45 (0.5kg), mit einer geschätzten Lieferzeit von 3-7 Werktagen.

TNT: Versandkosten reichen von $25-$65 (0.5kg), mit einer geschätzten Lieferzeit von 3-7 Werktagen.

EMS: Versandkosten reichen von $30-$50 (0.5kg), mit einer geschätzten Lieferzeit von 7-15 Werktagen.

Registrierte Luftpost: Versandkosten sind $ 2- $ 4 (0,1 kg), mit einer geschätzten Lieferzeit von 5-20 Werktagen.

Zahlungen

Payment Methods

Die Zahlungsfrist ist 100% Prepaid.

Derzeit akzeptieren wir nur die folgenden Zahlungsmethoden:

1. PayPal

2. Kredit- / Debitkarte

3. Überweisung